100% switch issue. Its not seeing the switch properly when it resets the bank. Go into switch test and bang on the playfield and see if switches make or not.
More than likely a out of adjustment switch or failing switch or diode.
You're currently viewing posts by Pinsider Hawk007.
Click here to go back to viewing the entire thread.
100% switch issue. Its not seeing the switch properly when it resets the bank. Go into switch test and bang on the playfield and see if switches make or not.
More than likely a out of adjustment switch or failing switch or diode.
You are welcome.
test will only fire once as its pulsed once. In game it needs all 3 drop target switches to be open or it will try to reset them again. Thats why the multiple hits.
And yes when you 'bang' on the playfield you are looking for any quick closures and adjust or replace them as necessary
Make sure drop targets are up when you do this.
Hey glad you got er fixed up. In coil test the switches make no difference to the coil being tested. The cpu pulses the coil regardless of what any switch says. Its the coil test not switch test so it only tests the coil being pulsed. Only in game mode will the game switches control the coil in question. Make sense?
Cheers
Enjoy your machine.
You're currently viewing posts by Pinsider Hawk007.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lw3-centre-drop-target-issue?tu=Hawk007 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.