Working through some issues on this project and making progress but one thing I’m not figuring out is no scoring or chiming on any of the 10 point contacts. The 10 point relay scores and chimes fine when manually activated and also works fine when an 1110 rollover is hit.
I figured it had to be the normally closed switch on Score Motor 1C with the green/orange wire but I’ve cleaned the contacts as well as the rest of the switches on 1C and it’s making good contact. There are a couple of jumper wires on that switch but they too seem to be intact. One thing that did happen earlier was that I got a weak 10 point chime on a playfield contact but only once and not anything since.
Not sure what else it could be. Thanks for any suggestions. Danny