Help!

1. Balrog hits sometimes register when pops are activated. Sometimes the Balrog does not register hits when it receives direct hit after hit though.

2a. When powering the game up the Balrog misbehaves. Its acts stuck &/or unaware of its current location. The fella moves back/forth & gets stuck

2b. Balrog switch shows open & closed in test mode when Balrog is clearly open (shows closed when closed).

2c. I wonder if the motor only wants to turn 1 way now (does it turn 2 ways?) or if that large cylinder the two switches read is out of alignment somehow?

Anyone want to help a brother out with priceless advice?

Thanks if so!

Relay board @ fault

Cannot locate replacement board.

Will need to repair soldering joints it appears. If I push the relay housing down onto the board it works. When I let go it does not work.

I shoved a toothpick between the board & relay (near the top) to apply pressure towards the bottom

That was not my idea. I read it in another thread lol.

Anyway, the game is fine now.

We don't need no stink' solder (not yet at least)