You're currently viewing posts by Pinsider Brewchap.
Click here to go back to viewing the entire thread.
I'm working on a Future Spa and I just lost all controlled lights. I checked all the fuses and found them to be good (tested with a DMM removed from game) and also thought that I found a bad rectifier, so I swapped that out also. Controlled lights do not work in diagnostic mode either, which was working previously. Am I missing a hidden fuse or something simple like that?
Quoted from Rikoshay:What DC voltage do you have at TP 1 on the rectifier board?
Are the switched light out in the backbox also?
I had 0 Dc V last night and the switched lights in the backbox was out also. But this morning, I got 7.3 Dc V at test point 1 with all switched lights working including the backbox lights. Also before the switched lights quit working I changed out the connectors J2 and J3 but not J1. So I'm going to change out J1just to be on the safe side.
You're currently viewing posts by Pinsider Brewchap.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/losted-controlled-lights?tu=Brewchap and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Richfield, MI