I ordered a new power supply board for my Bally Lost World, it desperately needs it, and have a question for all of you. As you can see someone eliminated the connector and soldered directly to the board at J3. There are 2 wires, one is white and one is orange that run behind the SDB and are soldered to the back of the J5 connector, so my question is it ok to leave these just soldered to the back of the SDB? I will repin and add a connector at J3 on the power supply board. Thanks in advance for all your help
20200929_162121 (resized).jpg20200929_162132 (resized).jpg20200929_162152 (resized).jpg20200929_162201 (resized).jpg20200929_162511 (resized).jpg20200929_162522 (resized).jpg