I recently bought JP lost world. The plastic drop target broke shortly after. I replaced it. Then about 2weeks later the snagger started acting up. It would occasionally not work. Then it stoped all together. I did some investigating and determined it was the drop target not going down. I determined this by triggering the locks with the glass off, then when the ball is on the magnet I tripped the drop target manually and the snagger works.
So, I went into diagnostics and the coil will not function. There is 22volts at both terminals on the coil. I also tried to jumper the coil to try to make it pull in, it didn’t. So I determined that the coil must be bad and Put the game back together, to order a coil later. When I started using the game it started working, for a while and occasionally after that. Anyone have any ideas of what to try next.