Does anyone know of a vendor that sells the shaker kit complete with roms and all needed parts as a package? I have a standard 2004 LOTR.
You're currently viewing posts by Pinsider SoCalPinballs.
Click here to go back to viewing the entire thread.
So I ordered all the parts. Installed the roms, PAL chip, shaker motor etc. Machine booted fine. Wired the red wire to the upper red wire on the coin door switch. Ran the brown/white wire to pin 5 of the connector with the orange and blue wires. Wired the large piggyback harness to the top of the driver board to J16 as instructed.
Now when I power on the game the shaker works great but the Ring opto and Tower opto are not working. If I unplug the supplied piggyback connector from J16 and plug it back into the board as original, the optos work properly again but not the shaker.
What could I be doing wrong?
You're currently viewing posts by Pinsider SoCalPinballs.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lord-of-the-rings-shaker-wanted?tu=SoCalPinballs and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.