R16 = 330 ohm 1/2 watt
R17 = 120 ohm 1/2 watt
CR3 = CR4 = 1N4004 (OK to use 1N4007)
Make sure to thoroughly brush off all the charred area on circuit board to avoid shorts!
You're currently viewing posts by Pinsider tuukka.
Click here to go back to viewing the entire thread.
R16 = 330 ohm 1/2 watt
R17 = 120 ohm 1/2 watt
CR3 = CR4 = 1N4004 (OK to use 1N4007)
Make sure to thoroughly brush off all the charred area on circuit board to avoid shorts!
Yes, Future Spa uses the same boards.
Just make sure that if the repair kit is for CPU battery corrosion damage repair, you dont mix up the resistors on CPU and driver board, R16 on the CPU board is 2k and R16 on the driver board is 330 ohm.
TIP102 and 1N4007 are fine.
You're currently viewing posts by Pinsider tuukka.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/looking-for-values-for-these-resistors-?tu=tuukka and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.