You're currently viewing posts by Pinsider Push600.
Click here to go back to viewing the entire thread.
Quoted from Dent00:Not sure on the exact size, but one option would be a washer assortment.
I bet one that will work is included.
Grand total of $5.99, plus tax.
See attached...
https://www.harborfreight.com/250-piece-flat-and-lock-washers-67593.html
Thanks for the info. Although I think they are much smaller than that.
Quoted from ForceFlow:Look for #4 flat washers. Then in the product details look at the diameter measurement, and see if that matches what you have. If not, go up or down a size (ie, #3 or #5) until you find a match.
I’ll try that. Thanks!
Quoted from ForceFlow:I think the OP was looking for the washer that go under the tubes, rather than the tubes themselves. Oh, also, if it's not a #2, or #4, it could be a 3/16.
I also found the tube posts a while back. I'll have to dig through my past orders to find the vendor and part number.
[edit]: It's a spacer. Here it is: https://www.boltdepot.com/Product-Details.aspx?product=25944
So, since that's a #4 spacer, the washer the OP is looking for is also likely a #4 flat washer.
https://www.boltdepot.com/Product-Details.aspx?product=4282
Thanks for all the info. I ordered a bag of 100. We’ll see if they’ll work!
You're currently viewing posts by Pinsider Push600.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/looking-for-these-washers-hard-to-find-part?tu=Push600 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.