Jurassic Park
Data East, 1993I am looking for the screw that is circled in the photo below for my JP. The screw is pretty long and attaches to the underside of the playfield via T-nut. There are 3 of these screws on each outlane guide.
I checked in the JP manual and cannot find the specs for the screw that is circled and I also checked Marco's for JP parts and cannot find it either. Any help on where to source these screws is appreciated.
Gord
I had the same issue on a Maverick.
I believe they’re 2 3/4” #6-32
I couldn’t find anything long enough locally so I ended up getting a couple lengths of threaded rod and cut it to size, then topped it off with a locknut.
Doesn’t look bad, as the rest of the playfield plastics of that area are topped with locknuts anyway.
Quoted from mad_carl:I had the same issue on a Maverick.
I believe they’re 2 3/4” #6-32
I couldn’t find anything long enough locally so I ended up getting a couple lengths of threaded rod and cut it to size, then topped it off with a locknut.
Doesn’t look bad, as the rest of the playfield plastics of that area are topped with locknuts anyway.
Thanks for the response. I was able to source the correct screws from our local Lowe's store. The correct size is #6-32 x 3".
Gord
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/looking-for-screws-for-jp-outlane-guides and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Los Angeles, CA
London, ON