Black Knight 2000
Williams, 1989I am replacing the motor on the drawbridge on my BK2K and I need some help tracking down this connector (see pictures) I thought I could reuse the old one, but I didn't even think I can. Any help with a link to were I should go. Thanks guys
20201009_190719 (resized).jpg20201009_190748 (resized).jpg20201009_190755 (resized).jpgQuoted from YeOldPinPlayer:Great Plains Electronics g-p-e is a connector guru.
https://www.greatplainselectronics.com/
LTG : )
I'm pretty sure this is the correct pin spacing. There is also one with closer pins. The game's manual might confirm the part number.
https://www.marcospecialties.com/pinball-parts/5791-12570-00
Can you just cut the wires and solder the connector to the motor? Protect the joints with heat shrink? The connector doesn't seem damaged at all.
There are two connectors that look nearly identical -- 03-06-2032 (0.062") and 03-09-2032 (0.093").
You can tell by looking at the base that this is a 0.093" connector --
0.062" series has a rectangular base, 0.093" has an oval base. One in the photo has an oval base.
Connector shown is 03-09-2032.
https://www.greatplainselectronics.com/products.asp?cat=87
Mating connector is 03-09-1032.
https://www.greatplainselectronics.com/products.asp?cat=88
Contacts:
https://www.greatplainselectronics.com/products.asp?cat=89
Quoted from G-P-E:There are two connectors that look nearly identical -- 03-06-2032 (0.062") and 03-09-2032 (0.093").
You can tell by looking at the base that this is a 0.093" connector --
0.062" series has a rectangular base, 0.093" has an oval base. One in the photo has an oval base.
Connector shown is 03-09-2032.
https://www.greatplainselectronics.com/products.asp?cat=87
Mating connector is 03-09-1032.
https://www.greatplainselectronics.com/products.asp?cat=88
Contacts:
https://www.greatplainselectronics.com/products.asp?cat=89
Thank you!, I put in an order for a few.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/looking-for-help-with-finding-a-connector-for-bk2k-motor?hl=roamin and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Hopkins, MN
Saint-hyacinthe, QC