I bought a Gorgar about 10 months ago, from a local seller. Tried it out at his house and it was working. I made arrangements to buy & pickup the following weekend. Backboard was already down when I arrived and I took care to load it onto my trailer and get it home. When I set it up in the garage, just my luck it wouldn't start up - would light up, but in the top left display it had "1496 1" and in the bottom display "04 00" (see attached image).
I spent sometime and tried re-seating all the harness connectors, installing new batteries, etc. Nothing changed.
Went through Vid's post on bulletproofing the Williams system and ordered up all the parts recommended (replaced capacitors, diodes, etc) while installing an Inkochnito bridge rectifier and a solenoid saver fuse board. When I put it all back together, the machine actually semi-worked (Gorgar spoke and I could use the flippers). When I turned it on the next day...back to the same "1496 1 / 04 00".
I'm posting, hoping that someone could point me in the right direction to try to solve whatever's happening (or if someone is local to Vancouver, BC and wouldn't mind giving me a hand..).
IMG_20190130_194124_01 (resized).jpgIMG_20190810_135131 (resized).jpgIMG_20190810_135145 (resized).jpgIMG_20190810_135120 (resized).jpgIMG_20190810_135154 (resized).jpg