I have the Marco one in my flash Gordon and i also used on in a friends eight ball Deluxe that i fixed. Great boards.
(Topic ID: 279905)
You're currently viewing posts by Pinsider wolffcub.
Click here to go back to viewing the entire thread.
Quoted from barakandl:I actually Just ordered the blank PCBs. Made the first prototype one a couple years ago and put it on the shelf for other things. Had some time lately so got this back out. Split the GI into two fuses. 43v bridge changed to 10a10 diodes. Feature lamp bridge will go on the bottom and mount against the large bracket like the original board did. Put the holes in so will be able to put the plastic shield over it. Traces are very wide and most are on the bottom. Any connectors with a top side trace connection has extra through holes to pass to the bottom side.
I have to buy different bridges though. Was not paying close enough attention but the Vishay brand GBPC35XXW bridges are only around 0.3" inches thick where the original (normal) are 0.45" thick so they will not mount right here.
[quoted image]
I would be all over this when you get it finished, like your DIY products. How are things looking for the reselling of the MPU boards?
11 months later
Promoted items from Pinside Marketplace and Pinside Shops!
Newcastle, OK
You're currently viewing posts by Pinsider wolffcub.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
