I tried installing this on a bally driver board(playboy) and can only get 4.5 vdc with pot turned up. Thanks in advance! JR
You're currently viewing posts by Pinsider pinballplusMN.
Click here to go back to viewing the entire thread.
I tried installing this on a bally driver board(playboy) and can only get 4.5 vdc with pot turned up. Thanks in advance! JR
Quoted from CoreyStup:My experiences:
They work great on the Bally/Stern SDU, but the resistor they used to raise the 323 above ground needs to be shorted. The EZSBC doesn't need it for a stable 5.1V and won't work properly with it.
On WPC I've had some success, but with early WPC sound boards the power off noise was extremely loud and was causing failures with speakers to blow and amplifiers to short out. It seems to oscillate as the input voltage drains off.
But a great product!
Wondering what resistor needs to be shorted. Is it on the driver bd itself or the EZSBC? Thanks! JR
You're currently viewing posts by Pinsider pinballplusMN.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lm323-replacement-released-at-ezsbccom?tu=pinballplusMN and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.