You're currently viewing posts by Pinsider kbliznick.
Click here to go back to viewing the entire thread.
Quoted from _litz:There's apparently a trim pot providing +/- 500mv of adjustment, so it should be possible to trim it above 5.00v.
This sounds like it makes a perfect replacement for WPC driver boards so that you don't have to add the 11 ohm or 22 ohm resistor to get it to output 5.1 or 5.2 volts instead of the 4.9V that they usually output with the stock configuration.
You're currently viewing posts by Pinsider kbliznick.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lm323-replacement-released-at-ezsbccom?tu=kbliznick and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Phoenix, AZ