Quoted from Black_Knight:Weird for sure.
I know it's frustrating, but go back to basics with the new board. Run switch (with balls in trough) and coil tests to make sure they are all good. Make sure there is a credit or confirm it is on free play.
Tests should prove all the connectors are on correctly and that all fuses are good.
Report back specific results and we'll determine step 2.
First, Thank you.
I went back to the basics and found that with the new board trough switches were not registering, not sure why. I did notice that tilt was closed. took off tilt but still no trough switches.
Since my old mpu driver would kick a ball out I assume that they register with that board set and now that I have disconnected the tilt....I should be able to play a game. Yes, That worked. Old boards work. Tilt was never an issue before.
Great take away "get back around to the basics", just because they worked last week doesn't mean something hasn't failed this week! LOL
Ive not had much luck with rottendogg lately. Maybe its just with BK. Ill check it in the my next game.
Thanks again to all. Everyone helping is much appreciated. Great group out here on Pinside!