Terminator 2: Judgment Day
Williams, 1991I have a Terminator 2 pinball machine. Everything works great but the lights in the center of the 3 Jet bumpers at the top of the machine dont light up.(the Jet bumpers work fine) I checked all the blubs and there good. I also looked for any loose wires and did not see any .Any help would be great. Thanks
Checked all fuses on board and there all good and I checked all connections there good to. Still jet bumpers don't light up. Any other ideas.
Thanks for all the help
Look below the playfield, find the wiring to the pop bumper lights. Power there ? Probably GI lighting so you are measuring AC - hot to common not to ground ). No power than work your way back to the head and look for a break or burnt header pins on the board.
If you have power near the pop bumpers, than likely the socket leads are broken. Time to take apart and investigate further.
LTG 
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lights-on-jet-bumpers-not-working?hl=maveric18 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Bossier City, LA