Hi was looking for a little help...... the small led lights are not working on my outhole ball assembly in my roadshow. I dont know why their not working.I also cant work out how to run a test on them as I did light test and nothing. Iv taken pics so if pics with help I have posted them. In the roadshow manual the part im talking about is the left and right the pcb assemblies which have half a dozen led diode lights running down each assembly. There Powered off anouther board and when I pull the plugs the trough kicks. So I know there working but the lights are not. Got me puzzled. Please any help would be grateful. As im stuck at this point......... and turning to the old pinside before I spend $.
cheers guys 20140910_225333.jpg20140910_225321.jpg20140910_231054.jpg20140910_225404.jpg20140910_232328.jpg20140910_232351.jpg
boastaflow

Cheers mate il try that out...... wondering if any other rs owners could tell me if the Iights work on their machine in the outball trough.

Ok cool. Thanks for the info. You guys have been very helpful.
Cheers