Quoted from bstyles:Here's the B/W wide-body wall (though not all are shown, all 7 are there) and another pic of some of the cars (before we added lifts and more cars).
I love your taste in cars, gimme some classic 60's-70's American muscle any day!
Quoted from BudManPinFan:I love your taste in cars, gimme some classic 60's-70's American muscle any day!
and look at how many are verts. too.
I thought this thread was about areas we worked on machines, not showed off our stuff. You know, like "shop"....As in workshop. I don't see much work getting done in these.
Quoted from Jjsmooth:I thought this thread was about areas we worked on machines, not showed off our stuff. You know, like "shop"....As in workshop. I don't see much work getting done in these.
Well my pictures are of where I'll work on mine but when is a good question. But the thread topic isn't specific so anything goes. 
Quoted from ramegoom:You have a point there. Here's my workshop:
You can never have too many Bally slots, especially E-Series, in your workshop
Wow, lot of nice workshops and garages in this hobby. I'm hopeful that mine will be photo ready by the end of the year 
Let's see some tools.....
Quoted from Skins:Just bough a paint booth curtian to section a 1/3 or one bay of my garage off to do cabinet prep and painting. Can't wait to get it installed. I'll post Pics when I get it put up. Here's pics from the site.
Binks or Harbor Freight?
Quoted from MrBally:Binks or Harbor Freight?
Neither. I wasn't aware harbor freight made paint booth curtains.
Quoted from stashyboy:My humble, but productive work space:
Small area in the basement has tumbler, ultrasonic, evapo-rust stations, rinse sink and leg storage above
Dirty area' for woodwork, grinding, sanding, spraying, etc.
Main operating table, parts cleaning, soldering, touch ups, etc.
Love the Royal Flush/Card Whiz wall hanger.
Well my garage/shop/gameroom II is basically done, just have to add some doodads on the walls. All the neons are up, pool table set up with a rgb led strip under it to light up the floor and an rgb led strip under the rails to light up the pockets. I hung a door skin from my Mustang when from when I raced it out at Bonneville with the number and class graphics still on it then wound a color changer strip a couple times around 4 screws 3 inches from all 4 edges so to give the wall around the skin a nice glow. Once I remove that last pile of stuff I'll have 20ft wide x 24ft long for just the Mustang. With both car doors open and a 3ft walk way on the one wall side that makes 16ft width taken up with 4ft to the pool table but with the doors closed and the car slid sideways toward the wall the car will be 11ft from the pool table. The floor will be a working floor, jack stands and floor jacks so it won't be getting a coating but I did fill the cracks. Hopefully I'll get the Mustang back in July then the fun will REALLY begin. Anybody want to come over and help.....with free beer and pool playing during breaks.
Quoted from stashyboy:ain operating table, parts cleaning, soldering, touch ups, etc.
Nice. This is the stuff I want to see. I wanna see where everybody works on their games. Where the rusty dirty old pins get restored. How they organize their tools and spare parts and such.
holy crap, wow these garages on here are... wow
guess I got some work to do, it's to damn hot to work in my garage I just insulated the garage door and going to install one of those ductless ac units.
Quoted from Skypilot:Got to be fake,Way to clean
Spent 5 hours cleaning it this morning. See the mop on the floor in the lower right hand corner of the second picture 
He is watching his fingers. If my eyes aren't lying to me, he has a SawStop table saw. I like the lighting...what is it, Mike?
Quoted from robotron911:He is watching his fingers. If my eyes aren't lying to me, he has a SawStop table saw. I like the lighting...what is it, Mike?
They are all LED fixtures. SawStop is sweet.
Quoted from bstyles:Here's the B/W wide-body wall (though not all are shown, all 7 are there) and another pic of some of the cars (before we added lifts and more cars).
what no popeye widebody? lol sorry I had to
awesome room!!!
If you reread the original post, I think it's pretty clear that it was intended to be a thread about workshop spaces.
For some weird reason the show-offs chimed in, with garages full of awesome sauce. Some folks' workbenches are in the garage, so there's their opening. Kind of intimidating to us normal people.
And one guy thought "shop" meant "store!" It can, but didn't. Looks like a cool place though!
English is a wonderful language, with so many synonyms and shades of grey...
I would like to see more tool benches, jigs & rigs, and workbenches, cluttered to immaculate.
Quoted from DanQverymuch:I would like to see more tool benches, jigs & rigs, and workbenches, cluttered to immaculate.
Here's my humble machine section. Electronics and games are at the other end of the house. The family keeps me contained to small portions of floor space.
Quoted from TimeBandit:Here's my humble machine section. Electronics and games are at the other end of the house. The family keeps me contained to small portions of floor space.
Nice
Ok, don't judge me now. My space is a total mess, but I seem to get by. When I'm in the middle of a project it's like a campaign. All the stuff I'm working with is out and continually in use. At the end of the project or at a significant rest point the whole place is made spotless. Really, it is. Stop laughing. 
The photos are just sort of panning out from the desk..
IMG20170329224110 (resized).jpg
Ooh, my reflow oven. Absolute BEST thing ever. SMD in seconds. Through hole is dead to me.
IMG20170329224116 (resized).jpg
IMG20170329224124 (resized).jpg
IMG20170329224136 (resized).jpg
Quoted from TimeBandit:Ok, don't judge me now. My space is a total mess, but I seem to get by. When I'm in the middle of a project it's like a campaign. All the stuff I'm working with is out and continually in use. At the end of the project or at a significant rest point the whole place is made spotless. Really, it is. Stop laughing.
The photos are just sort of panning out from the desk..Ooh, my reflow oven. Absolute BEST thing ever. SMD in seconds. Through hole is dead to me.
When the project is complete we expect pictures of the spotless workstation 
Seriously though awesome setup! So jealous.
Quoted from sed6:So I'm lucky enough to have the garage and the 10x25 bonus room above the garage.
OHHHHHH Mustang's!!! 
Can't wait till mine is in my garage.
Quoted from sed6:So I'm lucky enough to have the garage and the 10x25 bonus room above the garage.
Very nice. Do you keep any games in your bonus room? I like the F4U.
Quoted from DanQverymuch:If you reread the original post, I think it's pretty clear that it was intended to be a thread about workshop spaces.
For some weird reason the show-offs chimed in, with garages full of awesome sauce. Some folks' workbenches are in the garage, so there's their opening. Kind of intimidating to us normal people.
And one guy thought "shop" meant "store!" It can, but didn't. Looks like a cool place though!
English is a wonderful language, with so many synonyms and shades of grey...
I would like to see more tool benches, jigs & rigs, and workbenches, cluttered to immaculate.
It verbatim says garages. I think you might want to reread it, it's pretty clear.
Quoted from Procrastinator:It verbatim says garages. I think you might want to reread it, it's pretty clear.
Funny, I had just noticed that when I saw your post. Still, if one looks past the title, it's clear the OP wasn't asking for wannabe Jay Lenos' garages, he wanted workshops.
Quoted from Skypilot:With the Ohio show done I decided to reorganize a bit.
Farah was relocated.
I always wondered how cold it was when she posed for her best-selling poster.
Quoted from MrBally:I always wondered how cold it was when she posed for her best-selling poster.
I still have one.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lets-see-your-garage-shop/page/3 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Saint Paul, MN
Sydney, Oz
Newmarket, ON