Quakertown, PA
Quoted from jaytrem:Drywall is back up, feels like Grounghog Day!
[quoted image]
Looks good! I hope to start on mine in a few weeks.
Chris
(Topic ID: 1058)
Quoted from Mopar:...
I'm sure this is a ridiculous question to many, but what's an easy inexpensive way to
record and add Carousel music to the Merry-go-Round? Thanks for any suggestions.. (T)
[quoted image]
Stuff a hockey puck Alexa inside it, then just say "Alexa, play carousel music".
Quoted from Mopar:Over the weekend I built a stand and put a revolving Merry-go-Round (that I picked
up over the Summer) above the pellet stove. I'm 100% EM and know nothing about
sound components but the 1956 "Peppy the Clown" I have has a modern sound device
to play its music..
I'm sure this is a ridiculous question to many, but what's an easy inexpensive way to
record and add Carousel music to the Merry-go-Round? Thanks for any suggestions.. (T)
[quoted image]
if you need any I have some recordings of old mechanical music machines that might be a good thematic fit
Sandhurst
Quoted from MrMikeman:Not plug-and-play but fairly easy to setup.
Thanks. I'll be checking that out..
Quoted from cait001:if you need any I have some recordings of old mechanical music machines that might be a good thematic fit
Sounds good. Thanks. I'll 100% be keeping that in mind..
Quoted from ramegoom:Stuff a hockey puck Alexa inside it, then just say "Alexa, play carousel music".
Good thought , but I must say, my first request will be "Where can I locate a Ski-Bowlette!"
Bradford West Gwillimbury, ON
Quoted from atrainn:I spent some time last weekend rearranging the basement so I could finally lug DDR in there after spending the past two years living in the garage. It's awesome to have everything in the same place now! The previous owner of the house turned the basement into an apartment, so DDR is in the kitchen portion that pretty much never gets used. We baked rolls in the oven last Thanksgiving but that's kind of it.[quoted image][quoted image][quoted image][quoted image][quoted image]
This collection is AWESOME! I love the mix of pinball, arcade, candy cabs, and motion type games. Great job
Litvinov
Quoted from semicolin:I think the arcade is finally done enough to give you all the video tour:
Excellent hang-out! Love those 80's games!!
Munich
Quoted from trueno92:Finished up some cleaning... more to go..
#unfinsihedbasementclub
#lowendpinguy[quoted image]
That's not a game room... That's my dream bar. I guess your family and friends spend many an hour down there.
Quoted from trueno92:Finished up some cleaning... more to go..
#unfinsihedbasementclub
#lowendpinguy[quoted image]
Has a lot of character, good eye. Wish I could put something like this together
Quoted from oldskool1969:[quoted image]
Hey what’s up with the EM Topper? Is is metal? Never saw one before. Where did you find that?
Quoted from pinnyheadhead:Hey what’s up with the EM Topper? Is is metal? Never saw one before. Where did you find that?
PBresource sells that.
http://www.pbresource.com/signatur.html
Gilligan's Island
Quoted from pinnyheadhead:Hey what’s up with the EM Topper? Is is metal? Never saw one before. Where did you find that?
pinball resource, genuine copy. Metal back frame too if you want it
Quoted from Mopar:Over the weekend I built a stand and put a revolving Merry-go-Round (that I picked
up over the Summer) above the pellet stove. I'm 100% EM and know nothing about
sound components but the 1956 "Peppy the Clown" I have has a modern sound device
to play its music..
I'm sure this is a ridiculous question to many, but what's an easy inexpensive way to
record and add Carousel music to the Merry-go-Round? Thanks for any suggestions.. (T)
[quoted image]
It looks like your stove is very close to the wall, also where I come from, you should have at least 18"of fireproof flooring in front of it. It could get very warm above the stove for that carousel, I wouldn't place it there.
We Had another outdoor movie night last night, and the game room was pretty popular beforehand. It’s getting pretty crowded in there since making space for mando, I guess it’s time to start finishing some other space in the basement for some future expansion… 
344CCAB9-CA80-4F92-9850-0F5F6CAA9FF6 (resized).jpegFinally got my father in law’s games set up n his new house after 6 months in storage. Had to wait for a bedroom to be built in the unfinished portion of the basement so the gameroom space could be reclaimed.
1C390DD4-0B51-44D5-B3DD-6620F49CA4C3 (resized).jpeg209F9062-232B-450C-A637-1522D682C539 (resized).jpeg677F95B8-E289-4D6A-9B24-A5FAD2076868 (resized).jpegF67FC896-19B7-44BA-8064-0A1C8EDBFCAE (resized).jpeg
Quoted from DarthPaul:It looks like your stove is very close to the wall, also where I come from, you should have at least 18"of fireproof flooring in front of it. It could get very warm above the stove for that carousel, I wouldn't place it there.
Pellet Stoves have different restrictions. The forced air heat exits from the front. While in operation, the one
in the lower game room I can place my hand on the sides for a while. On the top, as long as I want.. This one's
the exact same make and model..
Quoted from jrockne:We Had another outdoor movie night last night, and the game room was pretty popular beforehand. It’s getting pretty crowded in there since making space for mando, I guess it’s time to start finishing some other space in the basement for some future expansion…
//<![CDATA[
window.__mirage2 = {petok:"613076ece750789c50ef6d99279281c02ee3014d-1632708460-1800"};
//]]>[quoted image]
Do those ceiling lights light up or are you shining a black light at it? Where did you get it from if you don’t mind sharing
Quoted from Jecco74:My second home… The office.
[quoted image][quoted image][quoted image]
Covering the playfield with those mats takes D.E. Tommy's to a whole new level
Quoted from Medic:Do those ceiling lights light up or are you shining a black light at it? Where did you get it from if you don’t mind sharing
Looks like Nanoleaf Aurora panels.
Quoted from Medic:Do those ceiling lights light up or are you shining a black light at it? Where did you get it from if you don’t mind sharing
They are indeed the nanoleaf panels. You can light them up any way you would like. I also like that I can turn them all on bright white, so the whole game room it nice and bright when I’m working on the machines
Quoted from Zablon:This thread never ceases to amaze (in a good way). 2 parts awe, 1 part jealousy. lol.
Haha, couldn’t agree more. More than jealousy it just makes me wish we all lived closer and could rotate around each other’s game rooms! Most people with these awesome game rooms are super friendly and welcoming…I just can’t drive 15 hours to hang out.
Quoted from jrockne:They are indeed the nanoleaf panels. You can light them up any way you would like. I also like that I can turn them all on bright white, so the whole game room it nice and bright when I’m working on the machines
How did you mount those Nanoleaf things? I bought some for my son’s room and they come with these awful sticker mounts that I do not want to use on the walls I just painted.
Quoted from Rdoyle1978:How did you mount those Nanoleaf things? I bought some for my son’s room and they come with these awful sticker mounts that I do not want to use on the walls I just painted.
I used 3m industrial velcro: Scotch 3M SJ4570 Dual Lock Low Profile Adhesive Fastener 5/8" Wide SKU: Length: 50FT Total: ebay.com link: itm
But I wanted to make sure they would hold tight to the ceiling and not come down. I prepped them with adhesive promoter and wiped the wall area with isopropyl alcohol and they have been holding good for about a year.
I have hear of people using command strips with good success. place a strip at the three tips and leave the pull tab out enough to pull and release the tile if you want to take them down in the future without damaging the wall. that might be a good option. but I those can get pretty pricey quick.
Quoted from Rdoyle1978:How did you mount those Nanoleaf things? I bought some for my son’s room and they come with these awful sticker mounts that I do not want to use on the walls I just painted.
I have purchased over 100 nanoleafs and have found the ones that come with it do a good job if you are sticking them vertically to the wall. If you want ceiling action, I went with the large command strips. And yes it gets pricey, but still cheap compared to how much you paid for each panel.
Quoted from Rdoyle1978:Thanks guys, sounds like command strips are the way to go
Make sure to post some pics after you are done. I would love to see it.
Quoted from jorge5240:The grail of slots has arrived!!!
[quoted image]
Wow great find. Not easy as most of them were fully destroyed (especially the top unit) before leaving any casino. Had a guy in OH that was recreating these I almost bought but just didn't pull the trigger. Good find.
Quoted from jorge5240:[quoted image]
Awesome GSW pop a shot! 
Quoted from jorge5240:The grail of slots has arrived!!!
[quoted image]
My favorite as well. Great score.
Quoted from Yelobird:Not easy as most of them were fully destroyed (especially the top unit) before leaving any casino.
Dumb question but why were they destroyed before leaving the casinos?
Quoted from bintzknocker:Dumb question but why were they destroyed before leaving the casinos?
They are leased to the casino. The casino has a contract to destroy them when they are done using them. They either need to be built from scratch or parted together or possibly hot to get one for personal use.
I was actually willing to pay quite a bit more for a newer one but they are basically unattainable.
Quoted from jorge5240:The grail of slots has arrived!!!
[quoted image]
Got the perfect topper for that machine:
20210928_054744 (resized).jpg
Quoted from jorge5240:The grail of slots has arrived!!!
[quoted image]
I can hear it just by looking at it.
Quoted from jorge5240:They are leased to the casino. The casino has a contract to destroy them when they are done using them. They either need to be built from scratch or parted together or possibly hot to get one for personal use.
I was actually willing to pay quite a bit more for a newer one but they are basically unattainable.
Now you tell me
Quoted from jorge5240:The grail of slots has arrived!!!
[quoted image]
heh your idea of a grail slot and mine are way different 
I already have my favourite slot machine (1948 Mills High top) but these are the only other slot machines I'd seriously consider:
Mills Novelty Dice 1 (resized).jpeg
Bally-Continental-929-1 (resized).jpg
baker pacers a (resized).jpg
ESI Rapid Roulette slot machine 6 (resized).jpg
Quoted from cait001:heh your idea of a grail slot and mine are way different
I already have my favourite slot machine (1948 Mills High top) but these are the only other slot machines I'd seriously consider:
[quoted image]
[quoted image]
[quoted image]
[quoted image]
That Rapid Roulette is a work of art. Wow. Congrats.
Quoted from gonzo73:That Rapid Roulette is a work of art. Wow. Congrats.
oh gosh I don't have any of those machines, those are just the few slot machines I'd want. 
Quoted from cait001:heh your idea of a grail slot and mine are way different
I already have my favourite slot machine (1948 Mills High top) but these are the only other slot machines I'd seriously consider:
[quoted image]
[quoted image]
[quoted image]
[quoted image]
Yeah everyone is different and that is what is so cool about collecting. I appreciate the slots posted above but they would would look outta of place in the game house.
Growing up in the 80’s/90’s WOF is the grail for us and was my dad’s dream acquisition.
The game house is 90’s arcade/unta club/bar and has a very distinct feel. If you are ever in the area let me know and really anyone can check it out.
Quoted from jorge5240:Yeah everyone is different and that is what is so cool about collecting. I appreciate the slots posted above but they would would look outta of place in the game house.
Growing up in the 80’s/90’s WOF is the grail for us and was my dad’s dream acquisition.
The game house is 90’s arcade/unta club/bar and has a very distinct feel. If you are ever in the area let me know and really anyone can check it out.
Am I the only one that googled unta club and came up empty in what it is?
Quoted from Marshall_ry:Am I the only one that googled unta club and came up empty in what it is?
Bro are you saying you don’t unta club? You are missing out
Quoted from radium:Bro are you saying you don’t unta club? You are missing out
I’ll blame it on age, although I don’t yet know if I’m too old to know or too young.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
