Quoted from Bos98:Minor lineup change. Working on a Marvel theme I guess? Anyone have an Ironman and Avengers I can pickup? I will need to rearrange to get Spidey, Magneto, Deadpool and the Guardians all together.
[quoted image][quoted image]
Magneto still my favourite looking Stern LE.
Only 2 in the UK i think 
Quoted from Bos98:Minor lineup change. Working on a Marvel theme I guess? Anyone have an Ironman and Avengers I can pickup? I will need to rearrange to get Spidey, Magneto, Deadpool and the Guardians all together.
[quoted image][quoted image]
Wow....great looking collection! That is really fantastic.
Quoted from Bos98:Minor lineup change. Working on a Marvel theme I guess? Anyone have an Ironman and Avengers I can pickup? I will need to rearrange to get Spidey, Magneto, Deadpool and the Guardians all together.
[quoted image][quoted image]
I see 4 ColorDMDs in your future.
Quoted from TorontoR:7 Surrounds, 6 sub channels (2 SVS PB-2000s subs, 4 Aura Bass shakers in the seats ), 4 ATMOS. I edited my post as thats too much information. Lots of power in that room.[quoted image]
Jeez man... that's a ton of power in those Emotiva's!!! You must be bi-amping your fronts? I've got mine bi-amped running an Emotiva XP5 in the front for my Axiom M80's and they sound darn amazing. Also have an SVS Cylinder sub, they make pretty great sub's! Your room must sound amazing!
Quoted from TorontoR:LFE is always one channel signal out. My prepro/ receiver has dedicated 2 channel descrete sub outs (although the native signal is always mono). This is to compensate for different placement of subs in a room when you run room correction/ calibration to eliminate nulls etc to have a smooth response in the room, hence the dual subs (one you see in the pic in the front of the room, and another is behind the seating area. There are a lot of filters going on, not just level correction etc. I have 4 other outputs from the sub split to another amp which feeds the arse kickers With the additional sub outs and the limitations to 2 channel sub outs at the preamp/ receiver, if I was to time, and tune right, I would need a Minidsp to run calibration thru.
M akes total sense, thanks! My buddy who is a huge theater nut markmon on here explained it well like you also. I have 2 18" fi infinite baffle subs right in the middle of the room in my main platform so it helps reduce any dead zones cause by front or back subs I guess. They definitely pound like no other. I always got the sub volume knob around 15% otherwise shit starts breaking all over
Quoted from jrivelli:M akes total sense, thanks! My buddy who is a huge theater nut markmon on here explained it well like you also. I have 2 18" fi infinite baffle subs right in the middle of the room in my main platform so it helps reduce any dead zones cause by front or back subs I guess. They definitely pound like no other. I always got the sub volume knob around 15% otherwise shit starts breaking all over
18" wow nice, how are you powering those bad boys?
Quoted from roar:Jeez man... that's a ton of power in those Emotiva's!!! You must be bi-amping your fronts? I've got mine bi-amped running an Emotiva XP5 in the front for my Axiom M80's and they sound darn amazing. Also have an SVS Cylinder sub, they make pretty great sub's! Your room must sound amazing!
ya man definitely over kill to be powering surrounds which are crossed at 100hz on those, went overboard for sure. You gave me an idea to try and bi am the fronts since they have handle 500w. Weekend project to experiment 
sample video
https://photos.app.goo.gl/ZMZxweMv2dVyXqXo9
Quoted from kciaccio:TNA looks so small..lol
Quoted from TorontoR:18" wow nice, how are you powering those bad boys?
behringer ep4000. They sit under the main seating couch
20180706_162527.jpg20180706_204724.jpg20180706_204740.jpg20180707_152505.jpgQuoted from jrivelli:behringer ep4000. They sit under the main seating couch
[quoted image][quoted image][quoted image][quoted image]
I hope you warn your guests that they are about to get their asses blasted! 
Quoted from jrivelli:behringer ep4000. They sit under the main seating couch
[quoted image][quoted image][quoted image][quoted image]
That's just great. Just great. So great.
Quoted from Buzz:You could export that Night Ridder to my house.
Yes, I had the Night Rider once set up and during gatherings, it did
get its share of play. I do need to let a few dozen machines go, but
the N.R. I'll probably be keeping around..
Quoted from jrivelli:behringer ep4000. They sit under the main seating couch
[quoted image][quoted image][quoted image][quoted image]
I bet the ladies love it
Quoted from Bos98:Minor lineup change. Working on a Marvel theme I guess? Anyone have an Ironman and Avengers I can pickup? I will need to rearrange to get Spidey, Magneto, Deadpool and the Guardians all together.
[quoted image][quoted image]
If you’re going to add avengers, be sure that when you decide to set fire to it that you do so outside. You may want to consider a catapult ala holy grail bunny as an alternative.
Some photos of my current lineup and gameroom:
1DB3D96A-D436-4740-AF4A-85FB92451573 (resized).jpeg441AA419-4BE9-4DC0-B0EC-2A0772E762BA (resized).jpeg4440AC28-E011-4DD5-A22C-7EB634DA4629 (resized).jpeg6C69AF69-809F-46B7-9712-CCCAEC1780C9 (resized).jpeg6DB5CFC0-4868-4934-94CC-602C5C362810 (resized).jpeg62C20AB5-7FD2-4DB8-8267-BAAC20668C26 (resized).jpegCC262B95-D10B-48CC-86B3-A3E2BED8772C (resized).jpeg96E87FC9-00DA-4959-B8C6-5F00CE9F2C7B (resized).jpegD10AC2EA-B304-47CA-955E-D39E79F2AFAF (resized).jpegCE89189D-A00C-4778-94BC-113FC6DB2102 (resized).jpegF3813D1C-6707-4596-8CD3-F8AFBBB89184 (resized).jpegQuoted from KLR2014:Some photos of my current lineup and gameroom
Ooooohhhh. Kate Beckinsale. She’s my favorite.
Oh and nice game room too.
Quoted from gliebig:Details on those ceiling lights?
Those are lightpanels from nanoleaf:
The lightstrip around the ceiling is philips hue lightstrips rgbw
Quoted from KLR2014:Some photos of my current lineup and gameroom:[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
You're missing WOZ to complete your JJP lineup.
BTW, nanoleaf is programmable and could be programmed to react to pinball events. How cool would that be?
Who will be the first to pull this off?
Quoted from arcademojo:Final line up change to the main gameroom. All games working with just a few little bugs to work out yet in 3 games.
[quoted image][quoted image][quoted image][quoted image]
"Final" LMAO!
Quoted from KLR2014:Some photos of my current lineup and gameroom:
Can the nanoleaf lights get hard wired, or do you need to plug them in? I’m currently searching for ceiling options and these look nice!
Quoted from arcademojo:Final line up change to the main gameroom.
Final? Not until you get a Fathom to match that floor!
Quoted from yzfguy:"Final" LMAO!
Quoted from goingincirclez:Final? Not until you get a Fathom to match that floor!
I didn't say infinite final rearrange just final for now. (at least 3 months)
Quoted from jrockne:Can the nanoleaf lights get hard wired, or do you need to plug them in? I’m currently searching for ceiling options and these look nice!
They come with a plug but I have them hardwired. I control my entire gameroom with apple homekit.
Quoted from KLR2014:Some photos of my current lineup and gameroom:[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Beautifull. Where did you get or how did you make the translight frames. They look to be perfectly backlit.
Quoted from pinballdork:Beautifull. Where did you get or how did you make the translight frames. They look to be perfectly backlit.
I bought them from https://pinball-universe.de They are not on the website but just email them for info.
They are indeed perfect in backlight, also the frame can be openend (click system for easy changing of translites). I have 2 for normal size translites and 1 for SPIKE system translites. They are not cheap but perfect quality and finish.
Let's spice this up a bit!
Looking for the perfect and affordable solution to show off your pinball translite? Introducing Lit Frames. An LED backlit, aluminum snap-edge, front loading frame to show of your pinball translite.
Product Details
- Custom built to fit the newer Stern LCD game translites (see game list below)
- Full LED strips with light diffuser panel for even light distribution
- Crystal clear plexi to hold translite flat and protect from damage
- Aluminum snap edge frame for easy swapping of translites in seconds
- Frame illuminates the translite better than the game does
- Swap translites in seconds without any tools
- Weighs only 8 pounds and as thin as a picture frame
- On/Off switch
- Includes wall plug
Current model fits these newer Stern LCD games:
- Munsters
- Beatles
- Deadpool
- Iron Maiden
- Guardians of the Galaxy
- Star Wars
- Batman '66
- Aerosmith
$150 per frame - includes shipping within lower 48 states. PM me.
Don’t see your game listed? Shoot me a message and let me know what size frame you would like created next.
Outside frame dimensions
27.5" Wide
18.5" High
3/4" Thick
56947704692__0A449B56-1211-47BB-867D-D7C7AB8AF181 (resized).JPGIMG_9482 (resized).JPGIron Maiden (resized).jpgStar Wars (resized).jpg
Quoted from arcademojo:Final line up change to the main gameroom. All games working with just a few little bugs to work out yet in 3 games.
...is that former Wendy's tabletops used in that bartop? I remember them being covered in ads up until sometime around 1990.
Quoted from LynnInDenver:...is that former Wendy's tabletops used in that bartop? I remember them being covered in ads up until sometime around 1990.
I've been to Arcademojo's place to buy a game once (A++ seller) and my buddy at the time asked the same question and indeed they are.
My Basement Arcade/business.
20190118_103939 (resized).jpg20190118_104011 (resized).jpg20190118_104131 (resized).jpg20190118_104111 (resized).jpg20190118_104949 (resized).jpg20190118_104958 (resized).jpg20190118_105008 (resized).jpg20190118_105016 (resized).jpg20190118_105023 (resized).jpg20190118_104042 (resized).jpgQuoted from Waldo:Kinda cool thing happened today. Cindy Morgan (Actress from Tron and CaddyShack ) found my arcade on FB and liked it and commented on it. Then friended me!
[quoted image]
Now that is cool. Glad to have helped make you room and games look super cool.
Quoted from Cdonnerusmc:My Basement Arcade/business.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Great selection, I hope business is good. That's bl carpet right? Now put bl's under the games and your room will completly different, your carpet will explode with color under your games.
Quoted from arcademojo:Final line up change to the main gameroom. All games working with just a few little bugs to work out yet in 3 games.
[quoted image][quoted image][quoted image][quoted image]
What happened to all your Classic Ballys?
Quoted from Waldo:Kinda cool thing happened today. Cindy Morgan (Actress from Tron and CaddyShack ) found my arcade on FB and liked it and commented on it. Then friended me!
[quoted image]
You are social media friends with Lacey Underall. Legend.
Quoted from Gritty:What happened to all your Classic Ballys?
Still have them. Just moved to other rooms. I have about 12 set up and the rest are broken down for now. Still have a few more years until I can extend the addition on the back of the house to hold all my classics. Right now it's 12 x 24. I want to make it 24 x 32. This will give me enough room to set up everything.
Quoted from Cdonnerusmc:My Basement Arcade/business.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Damn!! Really nothing else to say.
Quoted from Cdonnerusmc:My Basement Arcade/business.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
You have a very nice setup and a great collection.
Current pics of the game room / theater... added black light carpet to the game area... Also added a Japanese Pachislo/slot... This time I included pics of the concession area and the theater area... color changing LED strips under the pins... and black lights under facing down on the carpet... I forgot to turn on the small disco spinner lights that fit right into the recessed ceiling lighting... oh well...
gr3 (resized).jpggr2 (resized).jpggr1 (resized).jpggr4 (resized).jpggr5 (resized).jpggr6 (resized).jpgQuoted from cheshirefilms:A pin for my one bedroom place.
[quoted image][quoted image]
Get that chair outta there and make it a 2 pin place
Quoted from PinDeLaPin:Get that chair outta there and make it a 2 pin place
The plan is to move into a bigger place when my lease ends in May. At that point, it'll be on my to-do list.
Quoted from arcademojo:All games working with just a few little bugs to work out yet in 3 games.
There will always be 3 games with a few bugs in them...fix the first few and bugs will turn up in three of the others.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lets-see-pic-of-games-rooms/page/249?hl=bsobie and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Dublin, CA
Hamilton, ON