Lethal Weapon 3
Data East, 1992I have a Lethal weapon 3 with very low volume.
Volume control has no effect. there is sound from all
3 speakers. I have replaced the potentiometer but no
luck. Saw a video on you tube but that involved replacing
all the caps on the sound board. Although it worked, was
it really necessary to replace all 18+ caps?
It’s hard to tell if caps are bad but they will leak and give a shimmer wet look around it. I would start replacing ones that even remotely look iffy and see if it changes. If not, change a few more. They are cheap and relatively easy fix if you can solder. If it was me I’d change them all too.
Quoted from DeathTouch:I have a Lethal weapon 3 with very low volume.
Volume control has no effect. there is sound from all
3 speakers. I have replaced the potentiometer but no
luck. Saw a video on you tube but that involved replacing
all the caps on the sound board. Although it worked, was
it really necessary to replace all 18+ caps?
Check that all voltages are present:
Pin 1 Grey: 5V
Pin 2 Black: Ground
Pin 3 Black/White: -12V
Pin 4 Not connected
Pin 5 Not connected
Pin 6 Grey White: +12V
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lethal-weapon-3-very-low-volume?hl=deathtouch and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Harpers Ferry, WV