Hi guys, I'm in hopes someone can snap a pic and post if for me... one of two machines I brought home last week and this one has a burned board... well seems they cut the connector off, installed a power supply and wired the back box lights to that... ordered the board, re pinned the wires for a connector, but looking at the manual... I have an extra white/ yellow wire.
okay so I have the wires with new ends ready to plug into the connector... I need someone to check me on this as well.
according to the manual, see pic... the wires I have separated to the right have voltage... will these be my input? I was thinking yes
also, and this is the biggest thing... I have 9 wires and only 8 pins on the board. that's why I need a pic.
I have 3 white/ yellow wires... the schematic only shows landing for 2 of each color.
if you need more info or pics just let me know... thanks in advance for the input
manual page 45 first yellow sheet (PPB Board) top right on the page... (J5) connector--- bottom left board in the machine lol