If you have a new CN1 connector housing, just cut each wire one at a time as you crimp one and push it into the housing.
There is no reason for removing the whole wire harness out of the game to crimp one new connector.
You're currently viewing posts by Pinsider PinballManiac40.
Click here to go back to viewing the entire thread.
If you have a new CN1 connector housing, just cut each wire one at a time as you crimp one and push it into the housing.
There is no reason for removing the whole wire harness out of the game to crimp one new connector.
Time to measure all the voltages on the power connector at the DMD. -112vdc, -100vdc, 5vdc, 12vdc, 62vdc. Please report the voltages you measure.
Also, good to post pictures of the MPU with the ribbon cable connected and with the speaker panel laying forward so we can see everything connected there as well.
This should help as well.
https://www.pinwiki.com/wiki/index.php?title=Data_East/Sega#Testing_DMD_HV_Power
You're currently viewing posts by Pinsider PinballManiac40.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lethal-weapon-3-display-issues?tu=PinballManiac40 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.