I've been utterly swamped making LED adapters the past few months, and only just recently got enough breathing room to start working on my own projects again. The new aquarium and some rocketry stuff had priority, but this one is not forgotten.

I just started tinkering with Haunted House again a few days ago, making some improvements to the wiring harnesses for the playfields. I'm hoping to go more into detail soon.

Been slowly tinkering with some wiring improvements, but nothing really worth reporting in a bit. Just been too busy to work on this.

I did just order a virtuapin flatpack head box though, and a solid state drive. I really need to get a headbox of some type sorted out to get things where I'm not propping up a monitor on a chair to work on things.

-Hans

Good News Everyone!

I just got tracking info on my headbox.

-Hans

Coming along. Borrowed a brad nailer to keep it looking clean. I gotta get me one of them.

Not sure if I’ll paint now or later.

DF7FA9F7-3626-4F09-8CD1-7E2AF26C05DC (resized).jpeg

I just haven't had a chance to get back to it lately. Way too much going on right now.

Ok, finally getting some time to work on things. I’ve got the new virtuapin head mounted on the cabinet and I’ve started transferring the boards in.

Unfortunately, all the playfield wiring is to short to reach and I’ve got to extend it all. I may have mentioned this earlier, it’s been a while. I’ve already put in an extension harness for one of the three driver boards, need to get the other two done.

Once I get past this stage and have it all wired up again I can get back to development. Hard drive is temporary, until I can get it cloned into the SSD I’ve had sitting here forever.

C24F6EB1-1FA3-432A-A88D-D425F6C13212 (resized).jpeg

D8BCAEB5-B825-41C7-A037-78312924172A (resized).jpeg