I don't have a picture, but....

There will be a SOLID BROWN power wire that runs to all three flippers and the 1A fuse. It goes to the outside coil lug with the band on the diode - this lug also connects to one side of the EOS Switch.

The center coil lug only attaches to the the other side of the EOS Switch.

The SOLID GREEN wire goes to the outside coil lug with the unbanded side of the coil diode. It will then go to the Stacked Switch behind the EOS Switch.

The other side of the Stacked Switch runs up to the upper left flipper's outside coil lug with the unbanded side of the diode .

Hope that makes sense, lol

Have same problem upper left flipper coil is unhooked and the wires have been hacked and all are brown and one yellow with bands would like to know if some one can post a close up photo of this coil as it is wired in to the game thank you