Quoted from jake35:

I just ordered an OCD board for my Airborne. Only one board is needed correct? The stock incandescents are way too dark and it definitely needs brightening.

Quoted from herg:

The Capcom LED OCD does control both lamp matrices using a single board. It does not control flashers, however.

Quoted from transprtr4u:

Yes.... No LED flashers

Quoted from ccbiggsoo7:

where to order?

Quoted from herg:

Yes, but I would also recommend installing the LEDs and verify they are working prior to installing the board. The LEDs will be very flickery, but they should all light and turn off.

Quoted from jake35:

Make sure you dont leave any incandescents in the machine at all. I hadn't replaced the backbox lights yet on my Airborne with LED but did the playfield, and it kept blowing one of the microfuses. The fuses on the LED board cant handle the higher power draw, once I replaced all the bulbs the fuse stopped blowing.