After revealing my custom 3D Coin Reject Buttons (featuring 'The Object'), someone suggested I go a step further and make it a playfield mod -- and so I have. Notably missing from the Led Zeppelin playfield is 'The Object' from the 'Presence' album. Not anymore! Here it is, as a magnificent 3D-printed pop bumper cover toy, from Rocket City Pinball!
TheObject_RCP_1 (resized).jpg
The Object mod stands about 4.5" tall and is designed with a custom snap-fit mounting system built into its base and the included translucent pop bumper cap mount. (This mount design was created so The Object wouldn't require thru holes for the bumper cap screws). Installation is a snap (pun intended) --
1) Remove the original pop bumper cap by removing the two small mounting screws.
2) Install the included custom pop bumper cap/mount using the same screws.
3) Place The Object onto the cover and press down -- it will snap into place for a very snug fit! (It can still be removed later if necessary, by gently pulling/rocking it until it pops off, so you can access the screws below.)
You can rotate The Object about its center axis to your preferred orientation -- I've designed the mount to accommodate this adjustable rotation (while including including clearance for the screw heads) while still remaining snug in place.
TheObject_RCP_6 (resized).jpg
The translucent bumper cover/mount is available in your choice of red, orange, yellow, green, blue, or clear/white. (In my opinion, the clear looks the best -- but it's your game, you do you!)
Clear/white cap/mount, unlitClear/white cap/mount, lit
Orange cap/mount, unlit Orange cap/mount, lit
Red cap/mount, unlitRed cap/mount, lit
Now available in my shop, including a combo offer if you want coin buttons too.
The Object mod: https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/04919-the-object-led-zeppelin-pop-bumper-mod
Coin Buttons: https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/04899-3d-coin-reject-buttons-led-zeppelin
Presence (resized).jpg