IMO you shouldn't need any lubricant on spinners. They have been in pinballs for decades and don't need lubricants. Lubricants eventually gather pinball dust and cause the spinner to show down or gum up. If the spinner is aligned properly it should be good to go and go and go....
Quoted from pinmister:I just want a thin replacement decal that goes over original and is easily removable and does not affect rotation speed. Looking at lubricants for the spinner and saw a Tri-Flow pin point lubricator. Looks like a nice and easy way to keep that spinner lubed up and spinning at full speed. I have some WD-40 and bicycle chain oil, but I think I am going to buy some of this Tri-Flow pin point lubricator for using for moving parts like the spinner mech...
[quoted image]