Led Zeppelin (LE)
Stern, 2020
Led Zeppelin (Premium)
Stern, 2020
Led Zeppelin (Pro)
Stern, 2020Quoted from beelzeboob:Finally got a video of the problem. It seems to happen more during some songs than others. I know it happens during Good Times, Bad Times, so I video'ed that...and sure enough, it happened around 1:55 of this video.
Please excuse my repeated borked attempts to hit the center shot when it counted. The pressure was killing me.
You are not very good at pinball.
Quoted from Zosotatt:Added some vinyl to the Pro...
[quoted image][quoted image]
Been looking.
Where do you get that red blimp decal?
Thanks
Quoted from RexPins:Just loaded 1.02 today. Was a bit confused because my action button goes blue instead of red for the super..but then I found this. Yep, that would do it!
[quoted image]
thats unique are you going to switch it ?
Quoted from MajorDrainer:Dream Theme in the house...plays like a champ right out of the box...no spinner issues...perfect design for multi-ball...wish there were more songs but the 10 they picked are excellent choices.
[quoted image]
Nice flat top collection.
Quoted from Ericpinballfan:Been looking.
Where do you get that red blimp decal?
Thanks
...here
https://decalshut.ca/products/led-zeppelin-music-band-vinyl-decal?_pos=1&_sid=211be015d&_ss=r
Quoted from Jamesays:thats unique are you going to switch it ?
Probably...but certainly not a priority! 
Gawd! My LZ really, really, rocks! I started with a powered sub- everyone should at least do this. Then I added Pinwoofer which is great but I missed the earth shaking sub (Pinwoofer has no external powered sub) so I soldered the connection to the Pinwoofer system - I've found musical Nirvana! Especially EM frenzy.
Hi gang... has anyone found an adjustment that makes the upper flipper ramp any easier to hit? i'm about 1% success rate vs 60% on SM and 30% on ST. even when i "hit" it the ball typically rattles around and doesn't make it up the ramp.
apologies if this has been covered previously, i missed about 500 posts on this forum topic.
Quoted from wtatumjr:Gawd! My LZ really, really, rocks! I started with a powered sub- everyone should at least do this. Then I added Pinwoofer which is great but I missed the earth shaking sub (Pinwoofer has no external powered sub) so I soldered the connection to the Pinwoofer system - I've found musical Nirvana! Especially EM frenzy.
Frenzy rocks with pinwoofer and a sub!!!
Quoted from Hayfarmer:Frenzy rocks with pinwoofer and a sub!!!
bears repeating (resized).jpgQuoted from greenstreet:Hi gang... has anyone found an adjustment that makes the upper flipper ramp any easier to hit? i'm about 1% success rate vs 60% on SM and 30% on ST. even when i "hit" it the ball typically rattles around and doesn't make it up the ramp.
apologies if this has been covered previously, i missed about 500 posts on this forum topic.
i think hayfarmer covered this with a right flipper adjustment photos included not sure which number the post is though
Quoted from Jamesays:i think hayfarmer covered this with a right flipper adjustment photos included not sure which number the post is though
ty
I think pinside can officially say the premium is "in production" rather than "production planned." I am still waiting for mine and it seems like forever.
Quoted from JD4444:I think pinside can officially say the premium is "in production" rather than "production planned." I am still waiting for mine and it seems like forever.
I noticed that too. Seems weird that it says production planned and I've had my LZ premium for 9 weeks. Well over 700 games played!
Quoted from Jamesays:i see them now
I did an update on my avatar.
Quoted from LOTR_breath:I noticed that too. Seems weird that it says production planned and I've had my LZ premium for 9 weeks. Well over 700 games played!
Four more ratings on Premium and it will be in the top 100 list. Then it will be listed as in production.
Quoted from LOTR_breath:I noticed that too. Seems weird that it says production planned and I've had my LZ premium for 9 weeks. Well over 700 games played!
9 weeks!!! Thanks for rubbing it in . I ordered min in January ... there were 19 orders ahead of me. Still waiting .
Quoted from JD4444:9 weeks!!! Thanks for rubbing it in . I ordered min in January ... there were 19 orders ahead of me. Still waiting .
I ordered mine a few days before Christmas. Got in on the very first run. Trent/Tilt Amusements is awesome! I had the game on Feb 12th.
5 Le's were stolen over the easter weekend.
Important Notice.
Attention Pinball Enthusiasts,
A number of Led Zeppelin Limited Edition games were stolen in transit in Melbourne over the recent Easter Long Weekend.
The incident was captured on CCTV and Police were notified, as such there is an ensuing criminal investigation.
Please take note of the serial numbers below.
We would hate for any enthusiasts to buy any stolen property as there may be criminal and legal consequences.
If you have any information that may be helpful please contact Michael Bowyer via email [email protected]
Please feel free to share.
Serial numbers are as per below;
#455 – E312328
#255 – E312128
#266 – E312139
#154 – E312027
#53 - E311926
Quoted from koops:5 Le's were stolen over the easter weekend.
https://www.facebook.com/amusementmachinedistributors/?__cft__%5B0%5D=AZVuEjhKsM2Ue9j7bs3jT_-UfdomXsmN4ieXQQ_NITsjkGqgchLytr2tHRYL70NrnYjvjMoxBTlFtQXZkA-6aOZUDQQg3S3F4zkQCN6e45cimc3iDstlSJMC9Qig5jQWDqgEhTE2mGgG2jVWTX6kuHvia1QYi-roH6qkT_fZSCWvDiR5o828i6HAV1GnYI7YZOT8AMPQ_ENhd0TPFiJudAGZ&__tn__=-UC%2CP-y-R
Important Notice.
Attention Pinball Enthusiasts,
A number of Led Zeppelin Limited Edition games were stolen in transit in Melbourne over the recent Easter Long Weekend.
The incident was captured on CCTV and Police were notified, as such there is an ensuing criminal investigation.
Please take note of the serial numbers below.
We would hate for any enthusiasts to buy any stolen property as there may be criminal and legal consequences.
If you have any information that may be helpful please contact Michael Bowyer via email [email protected]
Please feel free to share.
Serial numbers are as per below;
#455 – E312328
#255 – E312128
#266 – E312139
#154 – E312027
#53 - E311926
now i see what you were talking about in the disappear thread
Quoted from Chisox:Not sure how I got there as I’m still trying to figure out the rules, but whatever that spinner frenzy mode thingy is....hell yes!!
Edit: Just got it again, Electric Magic frenzy.
After you get em first time, you clear led and zepp twice more to get frenzy. Then shoot a ramp or lock to raise spinner
Quoted from Jamesays:what you have here ?looks cool
Was on tilt graphics today. Wonder how it would look on le? I have webs on ehoh from them and they look great
Quoted from rcbrown316:You are not very good at pinball.
The WORST. And yet I'm still better than you. 
I can hit that center shot all day (I did it right after the ball was released), but when you MUST do it because you know you're filming it? Hardest shot in the world. 
Quoted from koops:5 Le's were stolen over the easter weekend.
That sucks, hope they catch them.
Unfortunately, I'm stuck at the office, but my Premium gets delivered in about an hour! I cant wait to see what numbers the wife posts by the time I get home. Great to be able to join this club.
Quoted from number_runner:Unfortunately, I'm stuck at the office, but my Premium gets delivered in about an hour! I cant wait to see what numbers the wife posts by the time I get home. Great to be able to join this club.
Lots of cool mods bein produced on this thread. Hermit and diverter cover are a must ,guitars being 3d printed are very nice too.
Quoted from beelzeboob:I'm still having an intermittent problem where the EM captures a ball, lowers, and the game never kicks another ball out into the shooter lane. Then it goes into ball search, releases the ball from the EM, and I have to recapture it...at which time it behaves normally.
Same issue on the latest code. It looked like the issue was fixed in 1.02, but alas it’s not.
Quoted from Dallas_Pin:Same issue on the latest code. It looked like the issue was fixed in 1.02, but alas it’s not.
Has anyone else besides you 2 had this prob? Mine has been fine. I havent done 1.02 yet, not enuf there to justify my super slow download speed here
Quoted from RexPins:Just loaded 1.02 today. Was a bit confused because my action button goes blue instead of red for the super..but then I found this. Yep, that would do it!
[quoted image]
Wow! Amazing QC. Guess installer was color blind. Nice catch.
Quoted from Hayfarmer:Was on tilt graphics today. Wonder how it would look on le? I have webs on ehoh from them and they look great
I have lockdown bar accents from Tilt for BKSOR, and STh. Will get for EHOH once Stern make mine. Great quality. Zero regrets.
Quoted from Hayfarmer:Has anyone else besides you 2 had this prob? Mine has been fine. I havent done 1.02 yet, not enuf there to justify my super slow download speed here
By my count, there's at least 3 or 4 people at this point. Pablo has sent the video on to engineering to take a look at. He said from what he sees, the ball is getting "held" by the spinner, which doesn't allow it to move enough to trigger the opto. But we'll see how this progresses. The only thing I can think of is that this happens because I flipped my spinner. I'm wondering if the other people with this problem flipped theirs.
Quoted from beelzeboob:By my count, there's at least 3 or 4 people at this point. Pablo has sent the video on to engineering to take a look at. He said from what he sees, the ball is getting "held" by the spinner, which doesn't allow it to move enough to trigger the opto. But we'll see how this progresses. The only thing I can think of is that this happens because I flipped my spinner. I'm wondering if the other people with this problem flipped theirs.
Not here. I flipped spinner day it was suggested, 500 + games since, have not had to remove to adjust or tweak. The ball rocks back and forth while being held. Sounds like a magnet prob maybe, possibly too strong? Have you tried changing balls out? Wonder if they are somewhat magnetized
My Premium arrived yesterday. Set it up and OH MY GOD!!! What a fun game!!! EM Spinner rips like crazy without even bending the bracket. I need to figure out the rules a bit but this is phenomenal game!
Quoted from Hayfarmer:Not here. I flipped spinner day it was suggested, 500 + games since, have not had to remove to adjust or tweak. The ball rocks back and forth while being held. Sounds like a magnet prob maybe, possibly too strong? Have you tried changing balls out? Wonder if they are somewhat magnetized
flipped my spinner and no trouble here
Quoted from beelzeboob:held" by the spinner, which doesn't allow it to move enough to trigger the opto. But we'll see how this progresses. The only thing I can think of is that this happens because I flipped my spinner
Spinner flipped; installed BallBaron carbon steel balls day 1; replaced them to see if it was the issue and no such luck. This was not an issue until 1.01 and 1.02. Before these releases life was perfect.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/led-zeppelin-le-thread/page/75 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Webster, NY
