Cool idea. Maybe it already does this, but can some GI be made not to flash at all? - Barry
You're currently viewing posts by Pinsider bflagg.
Click here to go back to viewing the entire thread.
Quoted from caker137:Yes! There are 4 channels (strings) of GI in the DE machine, typically 2 to the playfield and 2 to the backbox. With the board you can individually set any of these to always be on.
Very cool, I am interested. - Barry
If you disable flashing of the GI with either pulling the plug that controls the relay or the GI smoother, then I assume the lights won't go out during the startup sequence or game over correct? It would be nice to have the lights go out those 2 times but not flash the rest of the time if that's even possible.
Quoted from caker137:That would indeed turn them on all the time. You can get close to what you describe with my board. Most of the time gameplay flashing is relatively fast, and in between time is relatively slow. So what you can do is set the ramp rate to super slow, and the fast flashes are too fast to turn the lights off, but between balls they ramp down slowly. I do this on my lah back box (check out the videos).
OK, I watched and I like it. Sign me up! - Barry
You're currently viewing posts by Pinsider bflagg.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/led-gi-smoother-for-data-east?tu=bflagg and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.