My ST Pro. And yes, I know it's the wrong ship. I don't care... Saved me over $100 using this one and since I'm not a Trekie I don't even know the difference Last pic is of the bulb map.

222470.jpg222471-i.jpg222472.jpg222473.jpg222474.jpg222917-i.jpg

Batman and Bride All my own making (no kits)

15664-i.jpg15665-i.jpg15667-i.jpg15668-i.jpg15669-i.jpg

Avengers pro - yes, it's skittled but it's designed to match the LE light scheme. (no kit)

Video to show my custom apron lights.
https://www.youtube.com/embed/-LCEKx10Kt8?autoplay=1&rel=0

88556-i.jpg88557-i.jpg88558-i.jpg

Last but not least (as I don't have any pics of my TFLE on this computer).

AC/DC - Prem so it has factory LED's but I made this band roof topper using LED strips and a custom made top.

202953-i.jpg

CSI..... Done with our Universal Game Kit, and Plenty extra, for $99 with Free shipping.

composite 2.jpg

composite 3.jpg

composite.jpg

CSIa.jpg

Some games need a little bit of Skittle coloring. NGG is boring in all yellow and orange.
And RFM could use a little blue and purple to offset all the red, green, and yellow.
LAH benefits from a purple LED strip on the wireform and a few UV bulbs to make the artwork glow. (It looks less purple and more UV glowy in person.)
image.jpgimage.jpg

image-931.jpg
image-338.jpg

I love your Skittles!
,,,,,,are you sure you are not a short brunette?

(Taste the rainbow...)

Nope, still tall and blonde. Thought about dying my hair red, but that would just screw up my whole identity. Husband says to go blue. Lol

Here's another use for a LED strip. What do you do when you've got a big dark spot on your Jurassic Park, a LED strip, and a big ptero in the way? Make a ptero spotlight!

image.jpg
image-455.jpg
image-789.jpg

My Tommy took a while but finally got it right. No kits just lots of trial and error. Still working on the backbox .Any suggestions welcome.
IMG_0968.jpgIMG_0868.jpgIMG_0783.jpgIMG_0767.jpgIMG_0676.jpgIMG_0667.jpgIMG_0651.jpgIMG_0649.jpgIMG_0646.jpg

Your Tommy looks great! Does that foam help with the VUK bounceouts?

Always do my own custom Leds and led mods. Machines I've done so far...

Evil Dead AKA Holywood Heat

Pinbot

Taxi

Johnny mnemonic

Twilight zone

M S Frankenstein

Escape from the lost world

SWE1

RFM

Nba fastbreak

Escape from the lost world

South Park

Congo

Terminator 2 (homemade hunter killer lights and ramp plastic eye leds)

The Shadow

Metallica pro

Fireball classic (extra leds and lit spinning disc)

Take Five

Star trek pro ( homemade speaker grill lights, just bougt the toys and ornament and modded them myself. klingon battle cruiser and enterprise mods all leds)
Here are some pics of T2 and the shadow. All other pics are somewhere here on pinside.

Xmen magneto le (homemade nightcrawler led mod, speaker grill leds and ice man led mod)

CAM00526-1.jpg
CAM00522-1.jpg
CAM00530-1.jpg
CAM00537-1.jpg
CAM00528-1.jpg
CAM00542-1.jpg
CAM00627-1.jpg
CAM00734-1.jpg
CAM00733-1.jpg
CAM00025.jpg

You can download them here.

https://pinside.com/pinball/forum/topic/my-stle-custom-apron-cards/page/2

Heres a few of my games. All of mine are LEDd. Heres what I have for pics.

IMG_5218.jpg

IMG_5246.jpg

IMG_5387.jpg

Looks like you have an LED out on you FT topper.

I used CT blue frosteds in the "water/blue" areas, green frosteds in the background, and warm white frosteds behind skin tones/whites/logos. I feel limiting the maximum amount of colors for general illumination avoids a skittle look, and mimic the colors in the pf in spot areas gives a uniform appearance. I've kept the inserts incandescent because I like the warmth and fade.

100_3569.JPG
100_4138.JPG

You should be able to find on Ebay....if not, shoot me a PM.

Art

Where are those purples from? They don't look like the pinky purple ones I got from Art.

Hi Jeremy,

To get a purple color from an SMD, you need a frosted lens.....something to hold the color.
You had ordered clear, which cant produce the shade you want.....

IMAG2098.jpgTAF

Robowar

IMAG1986.jpg

X-Files

IMAG1886.jpg

TX Tx tx

265171-i.jpg

Actually that isn't correct as I have ones from pinbulbs & pinball life that are a great purple (with NO frosted dome). The ones from Comet look pink.

Art,

The sentinels LED is from pinbulbs and the blackbird inlanes are Comet. Same type of LED bulb (5050 SMD). If you think I got a bad batch, I can believe that because these look pink to me.

Below playfield pic of pinbulbs purple. Clear cap on 5050 SMD.
20140826_133943.jpg

Two purple bulbs (5050 SMD clear cap) from Comet. Very pink looking.
20140826_134255.jpg

flexible purple LED from pinball life with clear flipper button.
20140826_134122.jpg

Shot of both inserts. Not very obvious from the pic, but the Sentinel (pinbulbs) is much more purple than the inlanes (comet)
20140826_134001.jpg

Close up of the Sentinel insert (pinbulbs). Again, not so obvious.
20140826_134100.jpg

ToM is the CoinTaker kit with purple GI. JD is the pinballbulbs kit. I love how the purple LED's make the deadworld ring pop!

I REALLY like how pinballbulbs adds the LED strips at the top/bottom as well as the spotlights. Going to add a couple more spotlights to JD and a few to ToM. Have an ES at my brother's I'm also going to put some cool white LED strips on to brighten it up. Love being able to play in the dark!

IMG_3737.JPG

Could have been the batch, Jeremy, I too have had Purples from everyone, and dont see pink...but then it could be my eyes......the elusive purple LED question strikes again!

My T2 and TZ. I have a XMLE Wolverine with all the Gio and Hemi mods as well, but no pics at this time.

https://www.flickr.com/photos/adriandmd/

http://treasure-cove.net/Twilight%20Zone_AP.htm

White Water with various LEDs
IMG_0019.JPG
IMG_0014.JPG

Do the RIVER letters on the left look cyan or teal to people? They are supposed to be cyan. You can see the green lock targets and the blue from the targets to compare.
IMG_0032.JPG

LOTR with LEDs from Comet (GI needs tuning as some are still incandescent and LEDs need to be dimmer). Also found that a warm white would be better for GI on this machine. This is before I tuned the inserts using LED-OCD. Will post a new pic soon.
IMG_0035.JPG

Thanks Gweempose, it was your posts and pics that inspired me!!
Yeah the foam helps but bounceouts still happen too often as far as I'm concerned. I keep trying different foam trying to improve it. It does look a lot better without any foam in there as the light reflects nicely off the polished steel.

Space Invaders with about 200 LED's from Cointaker, my own design.

Before, boring....................................After, Awesome!
image-423.jpg

Here's what my 36 illuminated post lights look like by themselves.
image-295.jpg

WOW, that Space Invaders is the largest improvement I have seen, using LEDs. Especially the additional color and detail in the backglass.

87426322.jpg

I have to tell you, I have mixed feeling about LEDs. I love them in my TZ backbox, but I tried some in a yellow insert.

I did a side-by-side comparison in the Spiral Award inserts, at the bottom of the playfield. One was an incandescent, one cool white frosted, one warm white frosted, and a frosted yellow. I didn't like the look of any of the LEDs, in the yellow inserts. I do really like the look of a red LED in the red insert, just not a fan of the way they change in attract mode.

What do you find that works best in the yellow inserts?

If you mean the fade as they turn off and on - this keeps me from changing inserts in Bally Atlantis and Pinbot...at least, for now.

Warm white in yellow inserts.

I put a red LED in my Shoot Again and each outlane insert. In TZ one of the attract modes, the lights pan across the playfield, left to right, then back. The three red LEDs double-blink during this mode. For some reason, the Extra Ball insert in the Spiral Award series, doesn't do this.

It's not a huge thing I suppose, but they do act differently in some cases. The OCD add on board is supposed to solve this, but I'm not sure I want to spend the cash on one.

LED OCD FTW !!!

http://ledocd.com/