Good morning,
Could you please help me with our STTNG? It looks like that it is very lazy / slow when I compare it with the pin on the video. Don´t you please know where should be the problem?
Thank you!
You're currently viewing posts by Pinsider PohodaVole.
Click here to go back to viewing the entire thread.
I can try it but I made the angle according to the manual. I think that the flippers are also slow / lazy but we replaced all three coils so I don´t understand it. It is also very hard to shoot the delta quadrant with the upper right flipper.
I am 100% sure that we have correct coils because I bought them according to the manual. Thank you for the tips. I will try them.
Quoted from DaveH:follow his advice and make it steeper.
I will do this as the first..
I don´t want to make new thread so I will ask here again. Don´t please somebody know why are the bulbs in Borg ship always damaged after I replaced them? There are working correctly only bulbs in the right part of the Borg ship. Left and center part is always damaged after few games.
Thank you.
And the last problem regarding STTNG is:
I can´t never get EB in the video mode. I know that I can get him only when I have not got any EB before. Do you thing that the problem should be from LX-5 rom? I can get EB in video mode only once after I reset all settings to factory but after the second game the EB is not in the video mode.
Thank you!
Quoted from jitneystand1:Just in case this is it I'll throw it out there...the bulbs (some, at least) inside the Borg ship are supposed to be flasher bulbs, 906's if I remember right. If you are putting regular 555 bulbs (same socket type) then those will burn out almost immediately.
Oh I did not know it. Maybe this should be the problem because the right part is working correctly for a very long time. I will try to put these from the right side to the left and center.
Thank you all for the help!
Quoted from jitneystand1:906's if I remember right.
You are 100% right! I replaced them with 906´s and it works correctly.
Thank you!
You're currently viewing posts by Pinsider PohodaVole.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lazy-slow-sttng?tu=PohodaVole and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.