you could test the pia with a logic probe. see if you are getting a pulse from the proper leg.
You're currently viewing posts by Pinsider Bax1.
Click here to go back to viewing the entire thread.
yup sounds like bad pia. look forward to you getting it fixed. I just fixed mine but it was the magnet board.
Looks like they are a tad bit different.
HC is for CMOS
HCT is for TTL
I'm not positive but it might make a difference. now before you replace the chip, I just bought a new magnet board and fixed me right up. obviously you have an issue at the pia but might want to consider getting a new designed board. Got mine off ebay for $59 shipped.
sounds like the magnet board is not working properly. When I was trying to replace things on mine, the solder pads were coming off and I am the first to work on it. was all original. everything buzzed out to where it was supposed to go but after putting it back in, I was blowing fuses on the pbb board and said screw it. bought the new one and has been perfect since.
You're currently viewing posts by Pinsider Bax1.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/last-action-hero-magnets-not-working-1?tu=Bax1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.