I have a question fir the club. Im working on a lah right now, and im troubleshooting the magnets. I rebuilt the magnet board, and only 1 magnet works. There is a fuse under the playfield for each magnet, and 1 keeps blowing, the other 2 are fine. Is there anything on the main board connected to the magnets that im missing? Not sure why it would blow a fuse unless theres maybe a bad transistor. By the way, its 3a slow blow fuses, i just replaced what was in them. During test i can only get 1 magnet to go, is it supposed to cycle all 3, or do you have to push a button to get the others to pulse? Any help would be great. Thanks!

Also, i know its a long shot, but does anyone have a spare post that goes on the left side of the ripper? Mine is gone, and im not sure the length or style. Even a pic would help. Thanks!

Mine isnt stock, its been updated with the mosfet irl540 transistors, i was just curious if there was another transistor or something on the main driver board.

On a side note, i started a full topside teardown shop job tonight, i do believe this is the hardest game ive ever had to break down!

Are the magnet fuses 3amp slow blow?

Thanks a ton

I tried to post a video of the lah i was working on now that its done, but it was the wrong type of file. The leds turned out great and it cleaned up great. All it needs is a sticker over the admit one ticket on the playfield. Does anyone sell those?