Last Action Hero
Data East, 1993You're currently viewing posts by Pinsider Krh13.
Click here to go back to viewing the entire thread.
Quoted from BozoTheClown:Is anyone actively producing alternate translites? I'm not a huge fan of the original and I know I'm not the only one.
Here is one:
https://www.ministryofpinball.com/en/last-action-hero-alternate-translite.html
Screenshot_2020-04-17-23-25-03-1 (resized).pngQuoted from BozoTheClown:Is anyone actively producing alternate translites? I'm not a huge fan of the original and I know I'm not the only one.
Ebay has this one.
Screenshot_2020-04-17-23-23-55 (resized).pngWondering if anyone could help with 2 questions I have as I just purchased a LAH.
- what size/type battery goes on the board which is at the upper right side of the backbox?
- how do you adjust the volume of the game?
The game I bought didn't have an owners manual. I am looking online to order one but just wanted to ask if anyone could help me with these questions.
I still have to read through this forum topic completely but there are quite few pages to catch up on.
Thank you!
Quoted from dimthedaylights:Manual available here: https://www.ipdb.org/search.pl?any=Last+action+hero&search=Search+Database&searchtype=quick#1416
Battery not sure off the top of my head check the schematics above.
Volume: open coin door and there is a metal rod to the right, that’s your volume
Thank you !!!
2 quick questions if you don't mind. I'm still new to working on and repairing my pinball machines so any help would be appreciated. ..
- people have mentioned being able to adjust the height of the CRANE drop targets. How exactly do you do that? Once in a while the ball will get stuck on a lowered target.
- my right flipper suddenly became very weak and sluggish. That is when it works. I would say that a little over half the time it does not work. I checked the contacts, fuses, and wires (none loose) but these all check out.
Any help would be appreciated.
Thanks!
Quoted from jester523:There is an adjustment screw on the droptarget bank. Its the bottom left silver screw in the pic. It adjusts the bottom piece, which in turn adjusta how low the targets drop. Not my pic, from the website.
http://www.enteryourinitials.com/2016/03/27/last-action-hero-repair-service-log-5/
[quoted image]
Quoted from oradke:Had the same problem. Check the coil stop! In my case, the round cylinder had come loose. Just replace the coil stop (consider putting in a new sleeve while you‘re at it) and that should fix it.
Thank you both for your help!
Quoted from oradke:What was it?
I ordered new sleeves and stops so hopefully that is it. I had a friend suggest the same thing.
Looking for advise on my LAH. Suddenly the game is not recognizing when a ball goes into either hole. No score or action is taken and the game just sits there. Then it gives through the lost/stuck ball routine and fires off all of the coils and such. It ejects the ball and the game continues.
I activated multiball with the smart missile and balls just kept going in the 2 holes but it never ejected a ball. I got 5 balls in their as the remaining bell drained. It ejected a ball on ball search and eventually multiball ended.
I am relatively new to repair and would appreciate any advise. I am assuming a sensor of some sort is acting up as its not recognizing when a ball goes in either hole.
Any advise would be appreciated!
Thank you!
20201025_133414 (resized).jpg20201025_133601 (resized).jpg20201025_133951 (resized).jpgYou're currently viewing posts by Pinsider Krh13.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/last-action-hero-club-come-on-in?tu=Krh13 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
York, SC