Yes if you have a digital multimeter.
You're currently viewing posts by Pinsider palmer.
Click here to go back to viewing the entire thread.
Quoted from djreddog:I do, just not sure what steps I need to take. I can do the simple stuff like soldering, replacing parts, and testing fuses. Just not too familiar with diagnosing issues on the boards.
It is pretty easy. Although I would just go to pin wiki or google test transistor. I haven't done it in ages. I know there are three legs and you need to connect your multimeter and test in diode mode (I think). It is not hard although I think you need to desolder and remove the part. I am not sure you can test on the board. Someone correct me if I am wrong.
Quoted from ss-pinball:What's the story with getting a replacement Laser Cue backglass?
Is it tough? Easy?
I got one from Mayfair at a convention for like 90 bucks 2 years ago. I would check with them first.
Quoted from Schwaggs:Joined the club a couple weeks ago. A friend and I almost have it all shopped and back together. Played a few games on it today and it's mostly working! Couple switch adjustments and a bad coil on the drop target bank, nothing too serious.
Looking for a good condition back-glass. Mine is flaking at the top. Workable for now but would like to get a non-flaking one.
Any tips for replacing the "speaker cloth" at the bottom of the backbox? Mine looks kind-of ratty and has a couple holes. Any leads on the material to use?
Check with Mayfair on the backglass. I grabbed one from them at pinfest awhile back. BGresto does a repro but I don’t think it’s mirrored.
You're currently viewing posts by Pinsider palmer.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/laser-cue-club-clothing-optional?tu=palmer and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.