To all the folks that want to see a non solder repair done on a #44/#47 bayonet lamp socket.
1) Lamp socket.
IMG_0001[1].JPG
2) Setup lamp socket for rivet head removal.
IMG_0002[1].JPG
3) Head of rivet cut off.
a
IMG_0003[1].JPG
b
IMG_0004[1].JPG
4) Clinch tool.
IMG_0005[1].JPG
Tap,tap,tap... Test base lamp socket,
This one was in good shape, but had corrosion on the inside
of the brass eyelet.
5) Cleaning inside of lamp socket.
IMG_0006[1].JPG
6) New semi tubular rivet.
IMG_0007[1].JPG
7) Ready to clinch rivet and spring assembly.
IMG_0008[1].JPG
Tap,tap,tap... flair the inside and avoid bending the rivet stem.
Finished repaired lamp socket assembly.
IMG_0009[1].JPG
IMG_0010[1].JPG
9) Test continuity and short circuit possibilities.
IMG_0011[1].JPG
10) All good... ready to install.
Many thanks for the pinsiders that helped make this repair possible.

Thanks @mrm_4.

Their is no soldering... please read the title.

Their are two sizes I ended up using.
size 18 & 19, 1/8 semi tubular rivets.
with
1/8 clincher.