Hi!
I experienced this problem on a Rolling Stones.
The lamp "6" and "10" sometimes not working properly. While play it works, but when the machine is on standby mode, it makes this issue. Anybody got some idea for this problem?
Thanks!
Hi!
I experienced this problem on a Rolling Stones.
The lamp "6" and "10" sometimes not working properly. While play it works, but when the machine is on standby mode, it makes this issue. Anybody got some idea for this problem?
Thanks!
Hrmm this is a tricky one. The SCR that drives them is clearly good as it can turn off and on.
Can anyone confirm attract mode is not supposed to act like that?
Pull the two switch matrix input connectors on the right side of the MPU and retest. Occasionally a switch matrix short can confuse the controlled lamps.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lamp-problem-on-bally-rolling-stones and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.