Quoted from Adams_Tales:The game was fitted with inexpensive LED's when I got it.
Install incandescent bulbs or non-ghosting LEDs.
You're currently viewing posts by Pinsider pinballmaniac40.
Click here to go back to viewing the entire thread.
Quoted from Adams_Tales:The game was fitted with inexpensive LED's when I got it.
Install incandescent bulbs or non-ghosting LEDs.
Quoted from Roamin:No, it is not a preference.. LEDs do not act like typical light bulbs
It is a preference. I use Comet non-ghosting LEDs in the inserts and they work for me as the LEDs are either off or on. I use regular Comet LEDs in the GI and turn off the GI dimming in the adjustment menu. Works for me and many others.
I just choose not to put a magnifying glass to every aspect of every game. What's next, you are going to tell me what games to buy?
Quoted from Adams_Tales:I changed all bulbs for incandescent except popbumpers, startbutton and Buy in button. apparently all is good, but by second look the culprits still glowing slightly though not disturbing like before. But problem is still there. pinballmaniac40 could those 5 bulbs cause that same pattern of ghosting (I would guess no)??
Since you can still see some glowing with regular bulbs, this does not sound normal. Can you go into the single lamp test and see if those are still ghosting when you page through each bulb?
Can you describe how and which transistors you tested?
Quoted from athens95:If not isn’t the LED’s, it might be a bad TIP 107 transistor on the lower right part of your driver board. These drive the lamp matrix . I see these get weak, or in some cases completely short out. Change the Tip107 on that row and see if it gets better
I lean the same as athens95 mentions.
You're currently viewing posts by Pinsider pinballmaniac40.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/lamp-matrix-problems-twilight-zone?tu=pinballmaniac40 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.