Reprint using Word or equivalent. I just did this for a fuse label for a Bally EM.
This is an excellent site that will help you identify other information and fonts. http://www.pinballrebel.com/pinball/cards/bally.htm
I actually looked at that but did not find all the ones that I needed, what I did see did help so thank you for that
The Adjustments Plug card is hardly readable.
Can you please scan it again?
The size of the various labels/cards is also needed.
Can you put the cards and labels more in the center of the scanning glass?
Now there are edges falling off the scan.
The image does not have to be perfectly upright.
I can rotate the images.
Ok I'll try this again (Top to bottom)
Score motor is 3/4 x 6 in
The next one is 5/8 x 8.25
Next is 5/8 x 10.5
Next is 3/4 x 10.5
Next is 3/4 x 13
Next is 7 5/8 x 4.25
Next is 3.25 x 8.75
Hope that works better.Thanks Tim
Scoremotor Label.pdftilt.pdflock.pdf2 coin play.pdf300 advance.pdfTransformer.pdfAdjustment Plugs.pdfI made most of these labels, except for the transformer label. The mounting board plug label in my game also looks quite different from the comparable label in your game
Jody
All the labels I received are done and added to the cards file for Captain Fantastic.
Look on my website http://www.inkochnito.nl for the updated file in the Bally section.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/labels-needed-for-captain-fantastic?hl=skidave and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.