OP

Quoted from kruzman:

I want to make my once a year reminder that I offer drill and dimple service if you have a pf that is not. I dont recommend trying to install without it being done.
I just did a dolly and a funhouse, which was a IPB repro, but was not drilled or dimpled.
There is usually about 100 homes on the top side, and 180-280 on the back.
I all ready have templates for more than 40 titles, but I can do about 200 others from my collection and if i access friends and family, I think there has only been one title i have not been able to do. In 2 cases I bought used pfs to make a template for a job.

OP

Quoted from kruzman:

Good suggestions, especially about clearing away the clear coat. I sell a kit to do just that. it also removes all of the clear out of the t nut counter sunk holes so you dont have to break thru the clear, but pull them in nice and easy with a screw and washers from behind. The fins on a pop bumper lug (its what I call the nail screws) will crack the clear also if you dont remove it first.