Every time I think I am getting better at reading schematics I prove myself wrong. I just picked up a Gottlieb K&Q that is in good shape but has been sitting. At times the 1000 point light comes on when it hits 200, 300, or 400 points and scores replays accordingly. Other times it works correctly and doesn't come on until after the 900 reel clicks over to zero. I have the schematics but can't figure out the switches and relays. For once the wire colors are pretty easy to read.

Another problem is with the ace to king kick over. Nine out of ten times the ball hits the king kick out lever before it drops back into place. No problem with any of the others

Thanks for any help

Thanks for the input. I know where the HB relay is and the relay bar did come loose and pivot down. I'll start there of course and attack the kickout later. I did have a thought this weekend. I don't think there was a problem until I pushed it into place against the wall. I may have put it in a bind or created a level issue. I'll report back later this week

I'm up and running. I didn't explain the 1000 point light correctly. It wasn't just the light coming on, the HB relay was locking in, turning on the light. The hundreds 9-position switch looked good with plenty of air gap but tightening the stack and adjusting the switch took care of that problem.

The ace kicker switch in the hole was too sensitive. The ball was still rattling in the hole when the kicker hit it. If that makes sense. So it wasn't seated on the kicker lever. Adjusting the switch and tweaking the angle of the lever fixed things

Thanks for the help. Now I see why it is such a popular game. It is a blast!