Not permanent. I added one and it fixed resets, later added a color DMD and now get them occasionally during long sessions. The power section definitely still needs attention.
You're currently viewing posts by Pinsider ratshack.
Click here to go back to viewing the entire thread.
Not permanent. I added one and it fixed resets, later added a color DMD and now get them occasionally during long sessions. The power section definitely still needs attention.
Quoted from LoveNeverDiesGuy:Rob..
Do you have a well informed picture of where these Daughter boards go? I'm trying to explain to a friend where he needs to put his WPC power fix board on his Williams WPC (Fliptronics 2) , but I can not find a well diagram of where he can look in the back box and point where it exactly is. Please post or PM me a pic of the exact location that he can look and find with the back glass off a arrow pointing.
Thanks.
I had a picture of the board in my WCS'94 lying around. I'm assuming WPC and WPC-S MPU boards aren't much different from each other.
Fliptronics board should be in the upper left of the backbox, MPU board should be on the left side below it.
28157510_228322514402480_8072223129675497472_n (resized).jpg
You're currently viewing posts by Pinsider ratshack.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/kahr-daughterboard-question-is-it-a-permanent-fix?tu=ratshack and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.