(Topic ID: 54576)

Just finished putting LEDs in my pinball now it's reseting.. Argh!!!


By Choggard

6 years ago



Topic Stats

  • 8 posts
  • 4 Pinsiders participating
  • Latest reply 6 years ago by Rody
  • No one calls this topic a favorite

You

Linked Games

No games have been linked to this topic.

    #1 6 years ago

    Does that mean wiring are arching or something?

    #2 6 years ago

    Likely unrelated. With this little amount of data no way you get proper help. You didn't even list the machine for Pete's sake. This has to be the worst cry for help I've ever seen lol.

    #3 6 years ago
    Quoted from markmon:

    Likely unrelated. With this little amount of data no way you get proper help. You didn't even list the machine for Pete's sake. This has to be the worst cry for help I've ever seen lol.

    T2

    #4 6 years ago

    Well again its likely unrelated. Work through the pinwiki reset topic. Again, you still haven't provided crap for details so this is all the suggestion I can give you. (You didn't even define what you mean by reset, did not explain what you did for LEDs, etc).

    #5 6 years ago
    Quoted from markmon:

    Well again its likely unrelated. Work through the pinwiki reset topic. Again, you still haven't provided crap for details so this is all the suggestion I can give you. (You didn't even define what you mean by reset, did not explain what you did for LEDs, etc).

    I changed out all lighting with LEDs and during play the game reset. Reset- the games lights went out and turned back on..

    #6 6 years ago

    Is it immediatly when starting a game, is it when you use flippers ?

    Begin here : http://www.pinwiki.com/wiki/index.php?title=Williams_WPC#Game_resets

    #7 6 years ago
    Quoted from Thor-NL:

    Is it immediatly when starting a game, is it when you use flippers ?
    Begin here : http://www.pinwiki.com/wiki/index.php?title=Williams_WPC#Game_resets

    Last night when I pushed both flippers it did it once..

    #8 6 years ago

    Choggard,

    Your reset issue is coincidental to the work you've completed installing your LEDs.

    Your reset issue is a common issue with that era of machine, a protective action for the board when low voltage is recognized. This is often experienced when both flipper buttons are pushed at the same time.

    Take some time and follow through the pinwiki link provided to find a possible resolution.

    good luck,

    rody

    Promoted items from the Pinside Marketplace
    $ 69.99
    Playfield - Toys/Add-ons
    Lighted Pinball Mods
    $ 5.00
    Playfield - Decals
    Doc's Pinball Shop
    $ 29.95
    Gameroom - Decorations
    Pinball Photos
    From: $ 99.99
    Cabinet - Other
    Lighted Pinball Mods
    $ 11,500.00
    $ 399.95
    Lighting - Led
    Pin Stadium Pinball LEDs
    $ 19.95
    Playfield - Protection
    Little Shop Of Games
    $ 24.25
    Cabinet - Shooter Rods
    The MOD Couple
    $ 29.95
    Playfield - Toys/Add-ons
    ULEKstore
    $ 5.00
    Playfield - Decals
    Doc's Pinball Shop
    $ 44.95
    Playfield - Toys/Add-ons
    PinBoss Mods
    € 40.00
    Playfield - Toys/Add-ons
    YOYOKOPTER MODS
    $ 89.99
    Cabinet - Toppers
    Id Rather Play Pinball
    $ 69.95
    Cabinet - Shooter Rods
    Super Skill Shot Shop
    $ 25.00
    Cabinet - Other
    Filament Printing
    From: $ 9.99
    From: $ 9.99
    Eproms
    Matt's Basement Arcade
    $ 58.00
    Playfield - Toys/Add-ons
    Lermods
    $ 26.50
    Playfield - Toys/Add-ons
    The MOD Couple
    $ 7.49
    Electronics
    Yorktown Parts and Equip
    $ 48.00
    Cabinet - Other
    ModFather Pinball Mods
    $ 75.95
    Cabinet - Shooter Rods
    Super Skill Shot Shop
    From: $ 15.00
    Apparel - Men
    Pinside Shop

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside