I saw a video of assembly from quite a while back, and on it they were using the wet method. Not sure what has really been the standard in the past. I'm sure there are some here that know.
You're currently viewing posts by Pinsider imeh.
Click here to go back to viewing the entire thread.
I saw a video of assembly from quite a while back, and on it they were using the wet method. Not sure what has really been the standard in the past. I'm sure there are some here that know.
Quoted from inhomearcades:No manufacturer would shut their lines down over some peeling decals that occasionally cause an issue. The decals for all the machines have been made, they are not going to be remaking them, they are not going to shut down their lines because a few machines are peeling. If they start making decisions like that, they will no longer be open. Slap a new decal on in all of five minutes, less time than you have spent on this thread and stop being a "victim"
Glad you don't make cars!
Quoted from inhomearcades:So you don't have an action plan. It's easy to say you would solve something but just as you admitted you know nothing of the process. It's something that needs to be handled in steps, determine the failure point and correct it. You don't change everything at once. A process like this takes time. Your foolish if you believe you would just fix this so easily if you were in that position.
Really? It's a sticker! A third grader could figure it out.
I find this all quite amazing, we are not talking about putting man on Mars, it's a #*%+}#% sticker!
Quoted from RobT:Good question. Where the hell is Vid??
Been gone for 10 or 11 days now, my guess is someone pissed him off.
Quoted from yzfguy:Off topic much?!
Something has to keep this lame ass topic alive. It a #%[*^ STICKER!
You're currently viewing posts by Pinsider imeh.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/just-fell-victim-to-stern-qc?tu=imeh and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.