Quoted from Maxforwardspeed:Any tips here on leveling this? I'm going off the playfield bubble leveler and am finding that the back leg levelers are almost at the fully extended position. But this is requiring me to lower the tilt bob pretty far as it's leaning towards the front of the machine now. Is that common? I'm still not perfectly level, so the tilt bob will have to go down even more.
[quoted image]
Playfield bubble level is never accurate. If your back legs are fully extended then you are way way way too steep! Also if you find the tilt bob is not centered in the ring you can loosen or bend the ring to center it. Get a digital level and measure on the playfield. Back legs should only be roughly 1/2 the way out to be near 7 degree pitch.