Does anyone know if you can still but the amber shooter rod and housing mod. Looks like they are sold out everywhere. Thanks.
You're currently viewing posts by Pinsider robey99.
Click here to go back to viewing the entire thread.
Does anyone know if you can still but the amber shooter rod and housing mod. Looks like they are sold out everywhere. Thanks.
Quoted from Delta9:Modfather shooter couple leds i had lying around
[quoted image][quoted image][quoted image]
Looks great. Any diy details on how you did it. I have the shooter but not the lights. Thanks.
Quoted from Delta9:I just copied stern on the shooter plate by pics on this thread heres a link on some lights that will work just tye into the gi somewhere im tying mine into the amber light ebay.com link
Do you know what size holes you drilled. Thanks.
Quoted from Skeets:Do you mean the upper right flipper to to tower shot? If yes, mine flowed much better after tweaking the ramp flap screw on the left side. The ball was actually hitting the screw and jumping a bit before going up the tower. You can shave the screw head down a bit so it stops happening, makes the shot a million times better IMO.
Thanks. I will give that a try.
I am still not able to make the tower ramp shot. I was able to file down the ramp screw and it definitely does not strike it. It still goes about halfway and comes down. Sounds like it is not smooth and rattles around a bit. Can someone send me a picture of where the ramp meets the assembly. I want to make sure mine is installed properly since I am not the original owner. Much appreciated.
Quoted from ectobar:Look through your tower. Can you see the wireform? If so, you're good. If not, the wireform is going into the ramp like mine was.
[quoted image]
Here is a before/after shot.
[quoted image]
I think that might be the issue. Thank you for the pics. I will fix and let you know.
Quoted from OLDPINGUY:I filed down my screw as well, and it got better, but still too many rattles.
I replaced it with a smaller countersunk head and it went flush.
I then covered the ramp entrance with a small piece around 3/4" of mylar.
Lowering the power of the upper right flipper helps tremendously. Go 10%, then 15% etc, for your sweet spot.
I believe default is 235, I am now at 185, but have been happy up to 215.
Thanks. I will try that as well. My issue was that the ramp was installed incorrectly. Thanks ectobar for the pics. That helped fix. No more issues and making the shot now.
I have noticed on some pinball streams where they can lower the upper right flipper while holding the flipper button with the lower right flipper energized. Any suggestions on how that happens. Thanks.
Quoted from Indusguys:I put Titan rubbers on my game and I think it has made my game much harder to shoot. The slings seem especially active now and controlling the ball is a struggle. The ball used to come out of the right orbit and get kicked to my left flipper, now it is getting kicked to the left sling? Does anyone else think this game plays terrible with titan rubbers?
I don’t have any issues with Titans.
Quoted from WizardsCastle:Bubble should be between the lines, but it's not always accurate.
Buy a digital level on Amazon. It's a must have if you're in this hobby
Use the Pinguy app.
Quoted from Dav_59_fr:[quoted image]
Very cool. Any pictures on how you mounted and cut? Thanks.
You're currently viewing posts by Pinsider robey99.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jurassic-park-stern-2019-owners-club-welcome-to-jurassic-park?tu=robey99 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.