Just joined the club 2 hours ago.
NIB August of 2019 Build.
Trying to get through the 120 pages here,
Anything important from that build run?

3 games in, love it and need to really read up game play.
20200723_125430 (resized).jpg

I have IMDN figured I should have Mr Elwins other game

I buy from company down south. He is my fav source for NIB

Clear might be great since its had a year to cure, or could be bad guess I will find out.

I'll check the flipper post deal.

Thanks

2 small posts have pooling. these are just above splitter for outlane. low traffic area but will let my distributor know about it. Unless I should start the complaint now I'll take your advice on that.

3rd flipper post is tight 20 games in. but noticed 3rd flipper is slightly down 1/8" or a bit more from alignment hole.

15955397499328692400748145892024 (resized).jpg20200723_161523 (resized).jpg15955397796688258304296812804454 (resized).jpg15955398375325811533625079137733 (resized).jpg

code was first step when plugged in. had 0.86 in it

So is everyones Upper Right fliper staged like picture above?
When ball returns out of O lane across upper flipper it bounces of post down to left flipper or sling.
Just want to make sure this is how game was supposed to return out of the O lane

Having issues with powered external subwoofer.
Polk PSW10. Had it shared with my Star Trek Prem and Iron Maiden no issues. sub would buzz if only 1 pin was on otherwise fine.
Sold Star Trek and hooked up my JP Pro.
JP speakers buzz sub and IMDN are quiet.

Any ideas. maybe ground loop?

I wont deathsave on my games.....Usually.
Pins at the bar are fair game if it doesn't tilt.

I recently switched over to these keyless ones.
a spare key should be easy to get.
https://www.pinballlife.com/keyless-coin-door-lock.html

Definitely worth it for $4. I like the keyed locks but at home there is no need.

Does anyone have any pictures of where the rod attaches to amber?
I have seen some where the amber is threaded and I don't particularly care for that look.

First for me jammed up under the truck.

20200903_193906 (resized).jpg

Has anyone seen or made a full length top/cap for the left ramp? Lately ball has been rejecting from upper rear most plastic top when hitting a full power left ramp shot.
I have flippers at stock power, had them turned down but then I cant backhand left ramp.