Quoted from fooflighter:I finally got around to doing my last mod, one that I wanted to do for a long while..Turned out awesome I think.
Used a 9/64 drill bit to drill out the spun rivets in the matchbox helo and separated the 2 halves and removed the landing gear...then used a grinding wheel to flatten the top of the helo to give clearance for the metal blades while using the factory bushing plate mounted under the plastic (didn't change that setup at all). I then used a step cone bit on the top of the helo to widen a whole large enough to give the plastic sleeve for the rod and the washers connecting the blades with ample room to turn uninhibited. (Basically the helo just sits around the original post)... Finally used a dremel to give some clearance for the 3 screws on the helo pad and fastened the helo to the pad with 3M tape.
Pretty easy mod all together, just need the right tools to start.
Love how it turned out
Here's a video of it in action, click link below
https://drive.google.com/file/d/1UZCWovuQw4dEjyZ-vRdhOq1uWxwUN_i4/view?usp=sharing
[quoted image][quoted image]
I love what you did here and I’m looking to do the same. Is there a reason you placed the chopper going in the other direction?